Question about Ricoh Aficio SP 100 e Laser Printer - Monochrome - 1200 x 600 dpi Pri
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Couple of things to try: - If you just emptied the waste cartridge then you have to take the bottle back out and clean the insides as well. The sensor sees the toner on the walls and still thinks it?s full. FYI as typical the manufacturer recommends replacing the bottle with a brand new one. - If not that then you may have toner covering the optical sensor. Try blowing the area where the waste bottle attaches to the printer with canned air. Let us know if you have any other questions and please don?t forget to rate this post.
Posted on Feb 17, 2007
the basic causes for this problem is either the foil is bad or weak. secondly the element in the fuser unit doesnt heat properly so try replacing it with a working one n see what happends.
Posted on May 28, 2008
you can find the driver here http://www.ricoh-support.com/enduser/downloads/downloads.asp?fileid=11540&ricohmodelid=6342&url=http%3A%2F%2Fsupport%2Ericoh%2Ecom%2Fbb%2Fhtml%2Fdr%5Fut%5Fe%2Fre%2Fmodel%2Fcl410%2Fcl410en%2Ehtm
Posted on Mar 21, 2009
SOURCE: paper misfeed in ricoh printer
1.Remove tray and clean the feed roller with cloth and 'fantastic" or windex. Make sure you rub dry after cleaning. All of this should be done with a ragg not a towel. You don't want lint on your roller.
2.make sure end fence (back guide in the tray) in in contact with paper.
Posted on Aug 28, 2009
there are two places to set the paper tray on the ricoh aficio 2035 print drivers first make sure you are using the PCL 5 drivers not pcl6 or rpcs then go to the printers folder and set the defaults by right clicking the printer and selecting properties printing preferences, then go into word and select print set up and properties then defaults for printer select bypass tray and select labels enter the correct sheet size for the labels from the drop down box click apply and you should be set.
if this resolves your issue please rate my anser accordingly
Posted on Sep 14, 2009
Tips for a great answer:
Mar 10, 2010 | Epson Stylus DX8400 All-In-One InkJet...
Aug 21, 2009 | Ricoh SP C220N Aficio Laser Printer
Aug 11, 2009 | Office Equipment & Supplies
Jun 19, 2009 | Ricoh Aficio CL7300 DT2 Laser Printer
Feb 10, 2009 | Ricoh Aficio AP2600 Laser Printer
74 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: