I have a Reebok zr8 treadmill, it suddenly stopped mid run now can't get it to come back on no lights nothing at all

If the E1 error occurs after the belt starts to move for several seconds, the error code means that the system is not picking up the speed of the motor. This pickup comes from a magnet mounted on the front roller pulley and a speed sensor, or a problem with the magnet.Feb 29, 2016

E1 Error Codes - The Treadmill Engineer

treadmill-engineer.com http://www.treadmill-engineer.com > 2016/02 > e1-error...

Reebok ZR9 treadmill has E01 error on console since ...

JustAnswer https://www.justanswer.co.uk > electronics > ca4k2-ree...
Reebok ZR9 treadmill has E01 error on console since moving · 1. Turn the machine off at the mains socket for at least 30 seconds · 2. Turn the machine on at the ...

• 
  

  I have a Rebok ZR8 treadmill that displays an E01 error

  https://www.justanswer.co.uk > fitness-equipment > dwrp...
  It is the internal sensor tr the mainboard that has faulted. I am really sorry about this and you are going to have to return the unit to have these tested and ...
  
  

..

Question moved from Computers and Internet.

Try a Power Reset.

How do I Repair a Reebok Treadmill? - eHow UK

https://www.ehow.co.uk > how_7313278_do-repair-ree...
Locate the power switch on the Reebok treadmill. It is near the power cord on the frame of the treadmill. Press the power reset button and wait five minutes ...

How to Troubleshoot My Reebok Treadmill - SportsRec

https://www.sportsrec.com > Fitness > Cardio
Reebok treadmills are made to maximize your exercise experience. ... you can browse the troubleshooting tips in your user manual to rectify the situation.

What to do when Your Reebok treadmill is not working?

https://idswater.com > 2020/11/17 > what-to-do-when-y...
Nov 17, 2020 - When done the treadmill will perform the reset. Sole Fitness - Press the stop button to ensure nothing is running on the machine.

Error code E05 indicates a problem with the belt speed. Unlikely it is a bad sensor given the smell and heat. Hopefully it is under warranty.

There are troubleshooting tips is the user guide. Here is an assembly model that serves for both the ZR8 and ZR9.

The following indicates how to adjust speed and lubricatrThe first one may help narrow down the problem but the others may prove more helpful. If adjustment does not help, you likely will have to try a service tech.

https://anytreadmillparts.com/pages/treadmill-error-code-troubleshooting

https://www.sportsrec.com/351318-how-to-troubleshoot-my-reebok-treadmill.html

https://www.manualslib.com/manual/1064934/Reebok-Z9.html

https://www.youtube.com/watch?v=OFn0aVzkFlE

Chat with Reebok support:

https://www.reebokfitness.info/support-zr8-treadmill


Official Reebok Fitness

If you wish to get some details about treadmill error codes ; check the site linked here. Pull up older posts.
http://electro-medical.blogspot.com/

Try lubricating the belt. My treadmill requires lubricant every now and then. Its not your treadmill but a treadmill is a treadmill. That's what stops the belt from slowing down due to friction. Go to your nearest Gym they may be able to sell you a tube of lubricant. Good Luck

I’m happy to help further over the phone at https://www.6ya.com/expert/charles_6bf94c079488b145

Normally in almost all treadmills you will have option to change the metric.
If you wish to get some details; check the site linked here. Pull up older posts.
http://electro-medical.blogspot.com/

Hi Adrian, All a treadmill is... is a motor, running belt and console display pad. You'll find the console display pad has malfunctioned.... This can happen when something heavy is placed on it OR something hits it and if yours is under warranty then get it fix as soon as possible mate, I had a problem with my console display pad and it cost me $100 just for the pad....... My treadmill is a different brand but I can tell you the motor and running belt will last and last and last.....I hope this helps.........CHEERS..

They walkbelt is most likely worn out causing too much friction overheating the motor.

You need to replace the walking belt.