My copier has is code L6-10 on the screen what do i do?

Here is a list of all Sharp Copier Error Codes

The Sharp AR-M205 is almost 12 years old now. It will be very hard to find parts for that machine unless you can find a low meter on ebay.
You may want to take a look here at some of the current Sharp copier models. It looks like the Sharp MX-M232 replaced this machine.

Duplex model memory error/ Image data error
Detail 1. The memory capacity for the duplex model
machine is wrong. Insufficient memory
capacity.
2. Duplex setting is set for a single surface
model.

http://www.businessneedz.com/Sharp-AR-M160-AR-M205-Downloads.htm

The Sharp AR-M205 Copier, seems to be Discontinued. I can't find it anywhere. Although you can still get parts and Toner drums for it.
This place has it. Sharp AR M205 Copier. $1227!! http://www.digitalsystemcopiers.com/Sharp_arm205specs.html
:)

Dear, mail8 E7 has sub code please press ".key" to see the sub code .

L1 indicates the laser mirror motor is bad. The laser would have to be replaced to fix properly.

paper must have got stuck

Hello sir; "L6" display it means laser motor defect need to replace.

1. Uninstall the previous driver
2. Re-install the driver ( do not connect the usb cable at this time )
3. After driver installation, the pc will ask you to connect the usb, do this and it should be OK

Hello sir; this error code require reset the procedure as follow;
1, press "#", "interrupt", "clear", "interrupt".
2, enter 14, press start.
3, turn power off and back on