Question about Kyocera Color Copier, Km-c2525e

2 Answers

When i connect my kyocera km c2525e to the computer its picked as OEM 2JL-25C

Kyocera KM C2525E printer drivers problem

Posted by Anonymous on


2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Try networking the printer, but if the problem continues then u will need to provide more details about it

Posted on Jan 04, 2020


  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Kyocera Expert
  • 242 Answers

Hello, connect your copier in a network and you can use the drivers from this page

Posted on Dec 29, 2017


2 Suggested Answers


6ya staff

  • 2 Answers


Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


  • 66 Answers

SOURCE: copier km-c2525e will only print 1 page of document

it might be a long shot but have you got an add toner message on your copier screen.
When toner is required the copier will only print on page at a time.
Alternately you should ensure that you have not selected a partial print  eg
print current view or print current page.
if all this fails, reload the driver and or your Acrobat reader

hope this helps 

Posted on Aug 16, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What can I to clear the c7101 error?

you have a code saying 1 of your developers is bad

May 08, 2014 | Kyocera Color Copier, Km-c2525e

1 Answer

How can fix the error message c7104 in Kyocera c2525e

this code is saying you have a bad yellow dv unit you have to have a new 1

May 06, 2014 | Kyocera Color Copier, Km-c2525e

1 Answer

C2525e touch panel not working

Run a business card between the touch screen and the outside surround. Dirt or dust can make the screen believe that you are constantly touching the screen which will lock up the touchscreen. Try adjusting the screen brightness by adjusting the thumbwheel located at the far top of the display panel.
If this does not rectify the fault then the touchscreen will need to be replaced.

Mar 08, 2014 | Kyocera Color Copier, Km-c2525e

1 Answer

Print job stuck on the queu and dont print

look at bottom R of PC if the printer Symbol is there double click to open. Cancel all jobs, nothing will print if jobs are stuck. Once sleared try going to START -- SETTINGS -- Printer -- the one you are printing fromand right click on it. It will open up a window, go to properties and try printing a test sheet. if it still stays in queue, there is a problem with settings. Do you have more of one of the same printer then try the other one if it prints then delete the one not printing; or delete and reinstall driver.

Sep 05, 2012 | Kyocera Color Copier, Km-c2525e

1 Answer

How do I install driver for Kyocera CS 5035 on MAC

Kyocera and Copystar models are the same just replace KM with CS.

The following instructions should help you. TO download the current driver use this link to th emanufacture website;

Kyocera Printer Drivers and Mac OS® X 10.5 Leopard FAQ:
Is the installation for Mac OS X 10.5 the same as for Mac OS X 10.4 and earlier? Mac OS X 10.5 introduced a new printing architecture that requires changes to the installer and installation process. For this reason, Mac OS X 10.5 requires a new printer driver installer.

I cannot see my Kyocera AppleTalk® printer. How can I make it visible to OS X 10.5? AppleTalk is disabled by default in Mac OS X 10.5. Enable AppleTalk to discover your Kyocera printer.If you use the Kyocera installer, a message will appear, asking you to enable AppleTalk. Click Yes to continue the installation.

I cannot find Printer Setup Utility on Mac OS X 10.5. Is it still supported? Apple has removed Printer Setup Utility from Mac OS X 10.5. To install a printer, open System Preferences and click Print & Fax.

When I manually install a printer, multiple PPD files are listed for the same Kyocera model. Which should I choose? When manually installing a printer or changing a PPD for a installed printer, both Linux and Mac OS X PPDs are listed for some older Kyocera models due to a change in PPD handling in Mac OS X 10.5. Linux PPDs can be identified by the word Gutenprint in the PPD filenames.

Supported Multifunction Printers: KM-1650, KM-1815, KM-1820, KM-2050 ,KM-2530 ,KM-2550, KM-3035, KM-3050, KM-3530, KM-4030, KM-4035, KM-4050, KM-4530, KM-5035, KM-5050, KM-5530, KM-6030, KM-6330, KM-7530, KM-8030, KM-C830, KM-C830D, KM-C850, KM-C850D, KM-C2520, KMC2525E, KM-C2630, KM-C3225, KM-C3225E, KM-C3232, KM-C3232E, KM-C4008, KM-C4035E, CS-1650, CS-1815, CS-1820, CS-2050,CS-C2525E, CS-2550, CS-6030, or newer. Supported Printers: FS-820, FS-920, FS-1018MFP, FS-1020D, FS-1030, FS-1100, FS-1118MFP, FS-1300D, FS-1800, FS-1800+, FS-1900, FS-1920, FS-3800, FS-3820N, FS-3830N, FS-6020, FS-6026, FS-9100DN, FS-9120DN, FS-9500DN, FS-9520DN, FS-C5016N, FS-C5020N, FS-C5030N, FS-C8008N, FS-C8026N, FS-C8100DN, or newer.

I hope this is helpful,

Mar 08, 2011 | Kyocera Copystar CS-5035 Copier

2 Answers

Kyocera KM-1620 as a printer??

Yes, it can be connected as a printer -- see this page where you can download the print drivers:

However, it may need an optional interface attached. Check the back of the machine to see if there is a USB port (the squarish one). If there is nowhere to plug in the USB cable, you may need to buy the printer interface option.

Jul 07, 2010 | Kyocera Copystar CS-1620 Black and White...

1 Answer

I cannot get my KM-C2525e Printer/Fax to print

the first thing I recommend is to get the IP address of your copier... goto the copier and press printer key, then on the display press printer menu and then print status page... On this page you are looking for the IP address...

Now goto your pc and press start... press run... type cmd and press cmd and hit enter... a little black box should pop up... type ipconfig... see if the subnet and the gateway match whats on your paper... if it does then continue... (if it does not then go back to the copier and go into the printer menu then pick interface and then network... then tcp/ip then change... then fix the subnet and gateway to match whats on your pc... then turn the copier off and then on)

your next step is to go into the black screen that popped up and type ping and the ip address and hit enter... so if your copier ip address is then you type ping and hit enter...

if you get timeouts... then verify that network cable is connected... and that you see green lights where the cable is connected... if you don't then disconnect the network cable and ping again... if you get a signal thats not timed out you have an ip conflict... if that happens change the last digit of the copiers ip and ping until you get one that has gives you a timeout then change the copier IP address...

next test is to go to the web browser of your pc or windows xp and right where you would type in or type in the ip address for the copier... if you can pull up the copier's command center then the issue is drivers... if not then look at your network... if you normally have internet and you cann't get internet... your network is down... copier shouldn't work until network goes back up...

now if you get no timeouts when you ping and you can pull up the ip address in browser and get command center... your next step is to get the right driver... goto then goto downloads then where it says choose a product select color copiers then where it says select model select your model then on the next screen pick find...

now for the right driver...install the uniprint driver 8.4... the first driver their... it will dither between a 64 bit and 32 bit pc... so you don't have to do anything but install it... when installing it... select network copier... then when it asks for port select tcp/ip and enter copier address and make sure when it shows you... the list of copiers to select kmc2525e... and follow the steps... it does have an option to detect the copier this doesn't always work but if it does... then the copier IP address will pop in the driver install and you select it and it does everything else...

I’m happy to assist further over the phone at

Dec 14, 2009 | Computers & Internet

1 Answer

Copier km-c2525e will only print 1 page of document

it might be a long shot but have you got an add toner message on your copier screen.
When toner is required the copier will only print on page at a time.
Alternately you should ensure that you have not selected a partial print  eg
print current view or print current page.
if all this fails, reload the driver and or your Acrobat reader

hope this helps 

Aug 14, 2009 | Kyocera Office Equipment & Supplies

Not finding what you are looking for?
Kyocera Color Copier, Km-c2525e Logo

Related Topics:

156 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kyocera Office Equipment & Supplies Experts

Tareq Bin Mostaq...
Tareq Bin Mostaq...

Level 3 Expert

1449 Answers


Level 3 Expert

1363 Answers


Level 3 Expert

85222 Answers

Are you a Kyocera Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides