Hi All. I have a 10kg Whirlpool front loader sport 6th sense, Model WFE1210CS; error code F35.

Does anyone have this cover for this washing machine? 6th sense whirlpool washing machine wfs1275cd. Whirlpool doesn't have the part and can't find any repair stores online. I'd be so appreciative and will organise postage for it thank you in advance.

Hello Janine Gooch,

Went out on our internet trying to find your trouble shooting guide (typically in the OWNERS MANUAL)...

Finally ended up in AU ... No luck.
(September 9th is only 6 hours old here (SF Bay area)).

Your local peers have NOTHING NICE to say about that machine... particularly the CONTROL BOARD:
Whirlpool WFS1071BD Question and Answers

Hope this helps (says top load... shows front)

Carnac the Magnificent

go google and type in--operators manual fro whirlpool washing machine model wfs1071aw --- and down load the pdf version

Check this attached link, it may give you incite on your washer problem

Morning, Your model number does not come up. It is located on a front loader behind the door, top loader under the lid. GE right side at front bottom of case. Will await your answer. Thanks

F35 is a water level error.
The water level switch (pressure switch) has malfunctioned.

If you remove the top panel, three screws in the back, you will have access to the pressure switch.

With the tub empty, remove the vinyl hose from the switch and blow backwards through the hose to clear any restrictions.

If the fault codes return after doing this, you will likely need to replace the pressure switch.


Also - please be sure to use He soap.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.^^^^

my whirlpool 6th sense dreamspace has a red ligth lit indicating water tap closed can anyone explain why?

my whirlpool 6th sense will not start all lights and power i think that it is the door sensor at fault? The green light door locked light is not on.