When scanning a document on my Epsom XP-335 the document will not save as the message "Access to ABBY FineReader 6.0 blah blah blah is denied. WHAT'S CAUSING THIS? Any advice welcome.

You should be able to assign Abby FineReader 11 Pro as the OCR software in the Lexmark software (Lexmark Productivity Studio for Windows or All-in-One Center for the Mac OS). You will need this software though and to have the monitor running to "listen" for the scan button to be pressed. You will also need to ensure your firewall doesn't block communication if you connect the X6650 through the network.

In the Productivity Studio (launch Lexmark Home), click on the Settings tab and then the Scan Destinations option. Add Abby FineReader 11 Pro to the list of destinations. Click on that option and click on the Modify button to make sure that the Application button is set and is pointing to the correct program and correct file type. Then you can go back to the all-in-one and press the Scan button. Select Scan to Computer and then choose Refresh to update the list of destination programs.

I hope this helps. The steps may be slightly different in the Mac software.

Cindy Wells

You will need to re-install Abbyy Finereader software.

Hi,

what you want to do, is not possible. Only way to properly write on a form, is that you have the original digital computer version of it, sure you can scan it, but you can not use / write on the same way. Sure you can use the computer to ADD text into the form, if you scan it as a picture, and then use the Microsoft paint program to add text on the fields. But its not the same as having the original digital form to write on.

Or then I'm not informed on how to Scan a form, to turn it into a form and then to fill out that form on your pc.

for scanning you can use every program that supports scanning (irfanview is freeware, ABBY finereader and many others). You can try new version of smarthru (for samsung SCX 4300).
pifonski

The Lexmark OCR scan software is available in the installation disk that came with the printer. You can explore the installation disk and look for the Abby setup application in the OCR folder (for Windows). For Mac OS, right-click on the Install icon and choose Show Package Contents. Open Contents folder > open Package folder and manually install the Abby Finereader application.
However, if you don't have the installation disk, contact Lexmark technical support. Thanks.

please install all the fonts . On the"stupid" computer you don't have the exact font ...Save the fonts from the wise PC and copy to the stupid one. It make it wiser . :P . Usually fonts are found in folders named "fonts". Windows, Office and Abby Reader are using large collections of fonts.

Which operating system are you running? If Windows, in the Control Panel is a program "Add or Remove Programs". Click on it and locate your program you wish to remove from the list.

Hope this helps,
matt

I need the scanned documents be saved as pdf in HP scanjet 5590

This will sound off the wall, but we had something similar to this happen with my last laptop, where it was "access denied" in lots of areas, and we would have to find little backdoor ways to get into control panel and document files. The problem with our computer was that it had previously crashed, and we had rebooted and reinstalled the xp, but didn't have the registration number, so it would run ok, but to get into all those access denied things (which you eventually need to get into) we had to come up with our registration number.
Did it prompt you to enter the product key when you re-installed it?

you need to open the pdf in acrobat professional and export it as a word doc