Help for Panasonic Lumix DMC-TZ 1

Remove the battery for 20 mins. replace the battery.turn on and go to the camera's Menu scroll through the settings to the Date & Time, set the current date and time.

1. Set the mode dial to P
2. Press the menu/set button
3. Select the setup option
4. Scroll through the setup listings until you get to 'reset'
5. Select the reset option to reset your camera.

try resetting the camera to factory defaults.

Sounds like your screen is cracked.

Sounds like a cracked screen.

Yes, the camera has PictBridge capability.

From the Setup menu select "USB". Make sure the camera is set to PictBridge instead of PC. For further details, please refer to the section "Printing the Pictures" in the manual. If you need a manual, you can download one from the manufacturer's web site at http://www2.panasonic.com/consumer-electronics/support/Cameras-Camcorders/Digital-Cameras/Lumix-Digital-Cameras/Operating-Instructions/model.DMC-TZ1K.O

you'r menu should have a reset setting, there are 2 menu's 1 when you'r ready to take a picture & 1 when you'r viewing you taken pictures

Hi,

Please see below for a link to the Lens Cap with String. This is an original part direct from Panasonic. Used specifically with this camera.

Lumix DMC-F27 Lens Cap with String

Pics are about 2 per second. If action is fast, like downhill snowboarding, then may not be fast enough for you. Use MOVie mode at 640 by 480. Not bad.