Question about Element Televison & Video

2 Answers

I have an Element tv that has no picture, good sound but basicaly a black screen. Do i need a didgital board or a main board?

This is a ELEFW605

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Element Master
  • 362 Answers

Https://www.Abctay.com is an online shop ,
We sell television and electrical accessories,all kinds of TV power supply board, logic board, TV LED screen,
TV LCD screen, mobile phone screen, as well as various types of electronic tools,tv parts power supply,LCD,ccfl ,
LED,OLED,lcd panels,HMI,Inverter,LCD screen,lg screen,display screen,lcd monitor,lg lcd, lg monitor ,flat screen ,
touch screen,hmi,bulb,samsung, innolux ,Mitsubishi,philips, hitachi,auo,innolux,Planar, toshiba, siemens,chi mei,Weinview,
Infineon,industrial LCD,industrial control, sharp monitor,vigor plc,delta, mitsubishi lcd,omron plc,etc


wholesale Samsung BN44 00715A L55G2Q ESM PSLF151G06A Power Supply Used

Posted on May 10, 2017

Ad

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Element Master
  • 76,204 Answers

Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis.
http://electronicshelponline.blogspot.com/
To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board.

Posted on Apr 26, 2017

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have an Element 60" tv elefw605 that has 1-2" black vertical lines on the right half of the screen. The lines run OVER the menu. Replaced the pwr supply, main board and the T- board. No change. ?


The display of your T.V. may have burnt out and may need to be completely replaced. My other answers would have been to replace the items you stated you replaced.

Jun 13, 2018 | Element Televison & Video

1 Answer

I got a Element elefw605 screen all white played with cables and ribbons got a picture on 3/4 of screen but now has horizontal line across center of screen.


3d mink eyelash 3D Mink Eyelash Factory Mink Eyelashes China Silk Lashes 3d mink eyelash Wholesale mink lashes factory, Manufacturer 3d mink lashes factory that give you fullness with hot fashionable. Our own brand 3d mink lashes is natural look, soft with fast delivery. From our factory u can get the perfect private packaging for luxury 3d mink lashes.
3D Mink Eyelashes Factory Mink Eyelashes China Silk Lashes

May 09, 2018 | Element Televison & Video

1 Answer

I have an element tv that isn't displaying picture only sound.


Most likely it's the LED driver. It could be on the main board or the power supply board. These people can get you the correct parts: TV Parts Universal TV Stands DLP Chips ShopJimmy

Sep 16, 2017 | Element Televison & Video

1 Answer

I have an 39' Element TV elefw392. There's sound but no picture on TV. There's only a power board, but no inverter board. What is the fix?


The LED driver is probably on the Main board. There is the T-Con board too. To determine which parts you need, do this. With the TV on and listening to a program, shine a flashlight on the screen and look for a faint picture. If you see one, the LED driver is bad. If you don't see a picture, the T-Con board is bad. You can get parts here: TV Parts Universal TV Stands DLP Chips ShopJimmy

Jul 24, 2017 | Element Televison & Video

1 Answer

Element tv model ELEFW605 dead set. voltages all ok except led voltages to panel are 0 volts. power on voltage is constant 4.5 volts no change when power button is pushed.


Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Pull up older posts.
http://electronicshelponline.blogspot.com/
In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.

Apr 11, 2017 | Element Televison & Video

1 Answer

My Element Electronics 46" LCD tv model ELDFW464 has sound but no picture.


Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis. http://electro-medical.blogspot.com/
To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board.

Jan 21, 2017 | Element Electronics Televison & Video

1 Answer

My 60 inch element TV model ELEFW605 started doing this this morning, not sure what the problem is. It's a LED TV. The whole left side is dark with a white line going horizontally across the center.


Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis. http://electronicshelponline.blogspot.com/ To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board.

Oct 07, 2016 | Element Televison & Video

1 Answer

I have a Element TV. Model #ELEFW605. It will not turn on. I want to know witch part to order to fix this problem.


Fault to the main power supply regulator section. Either it will be a separate board, or the part of main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts.
http://electro-medical.blogspot.com/

It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.

Apr 29, 2016 | Element Televison & Video

2 Answers

I turn my tv on the picture and sound all work and after about 20min the picture goes to a black screen and I still have my sound. I turned the tv off wait about 5 min turn it back on the picture come on...


If you have electronics experience - check the power supply and make sure you are getting the correct voltage to your inverter boards and main av board - also do you see any movement on the screen take a flashlight and shine on the screen - if you can see a dark image on the screen check inverter boards and power first.

thanks,

michael

Mar 21, 2011 | Element Electronics FLX3210 32 in. LCD TV

2 Answers

Picture great then goes black


Ur LCD inverter backlight board is dead.Replaced this LCD inverter backlight board will get ur picture back.Tries websites Shopjimmy.com,Ebay.com to buy a refurbish LCD inverter backlight board for the replacement.It a long board in shape.

Mar 11, 2010 | Element Electronics FLX-3211B 32 in. LCD...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

302 people viewed this question

Ask a Question

Usually answered in minutes!

Top Element Televison & Video Experts

Cindy Wells

Level 3 Expert

6068 Answers

The Knight
The Knight

Level 3 Expert

76204 Answers

Anthony Ward
Anthony Ward

Level 2 Expert

397 Answers

Are you an Element Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...