We have to push the on button on our TV from 20-100 times to get it to turn on. Have changed batteries and restarted to no avail.

Here you go...they have 4 avalable.
Generic Remote Control For Samsung TV UN46D7000LFX UN46D7000LFXZA eBay

Try Pairing procedure:

1. TV off
2. Bring remote within 3 feet of TV
3. Push Pairing button (Paper Clip or other pointed object in button hole)
4. Turn on TV
5. Should be paired. Try remote channel or other buttons.
6. If not, try 2 more times.
7. If still not working, push RESET button first and repeat Pairing.

Samsung remotes for LED / LCD TVs are generally RF, not IR.
Most Universal remotes do not generate RF signals, so disregard advice about codes for Universals.

1. TV off

Within 3 feet of TV




PAIRING and RESET buttons:

It needs to be Re-Paired to the TV.

First, fresh batteries, and clean battery contacts if needed.

Then, Try Pairing procedure:

1. TV off
2. Bring remote within 3 feet of TV
3. Push Pairing button (Paper Clip or other pointed object in button hole)
4. Turn on TV
5. Should be paired. Try remote channel or other buttons.
6. If not, try 2 more times.
7. If still not working, push RESET button first and repeat Pairing.

Samsung remotes for LED / LCD TVs are generally RF, not IR.
Most Universal remotes do not generate RF signals, so disregard advice about codes for Universals.

1. TV off

Within 3 feet of TV



PAIRING and RESET buttons:




Please rate if Helpful.

Good Luck !!

It needs to be Re-Paired to the TV.

First, fresh batteries, and clean battery contacts if needed.

Then, Try Pairing procedure:

1. TV off
2. Bring remote within 3 feet of TV
3. Push Pairing button (Paper Clip or other pointed object in button hole)
4. Turn on TV
5. Should be paired. Try remote channel or other buttons.
6. If not, try 2 more times.
7. If still not working, push RESET button first and repeat Pairing.

Samsung remotes for LED / LCD TVs are generally RF, not IR.
Most Universal remotes do not generate RF signals, so disregard advice about codes for Universals.

Please rate if Helpful.

Good Luck !!

1. TV off

Within 3 feet of TV


PAIRING and RESET buttons:

It needs to be Re-Paired to the TV.

First, fresh batteries, and clean battery contacts if needed.

Then, Try Pairing procedure:

1. TV off
2. Bring remote within 3 feet of TV
3. Push Pairing button (Paper Clip or other pointed object in button hole)
4. Turn on TV
5. Should be paired. Try remote channel or other buttons.
6. If not, try 2 more times.
7. If still not working, push RESET button first and repeat Pairing.

Samsung remotes for LED / LCD TVs are generally RF, not IR.
Most Universal remotes do not generate RF signals, so disregard advice about codes for Universals.

Please rate if Helpful.

Good Luck !!

PAIRING and RESET buttons:



Within 3 feet of TV

1. TV off

It needs to be Re-Paired to the TV.

First, fresh batteries, and clean battery contacts if needed.

Then, Try Pairing procedure:

1. TV off
2. Bring remote within 3 feet of TV
3. Push Pairing button (Paper Clip or other pointed object in button hole)
4. Turn on TV
5. Should be paired. Try remote channel or other buttons.
6. If not, try 2 more times.
7. If still not working, push RESET button first and repeat Pairing.

Samsung remotes for LED / LCD TVs are generally RF, not IR.
Most Universal remotes do not generate RF signals, so disregard advice about codes for Universals.

Please rate if Helpful.

Good Luck !!

PAIRING and RESET buttons:



Within 3 feet of TV

1. TV off

How to Program

Remotes With SET Button
1. Choose and press a device key i.e TV. LED will flash once.
2. Press "SET" Hold until the LED Lights up.
3. Enter the 4-digit Device code (refer code list).
4. The LED will flash once as each number is programmed at the end of the 4 digit the LED will turn off immediately if correct. If the LED flashes then something went wrong in the process. If the first code does not work then repeat the process with the next.
5. Important - Some brands use other manufacturers to make their devices if the codes available do not work the try the MAGIC search function.

Remotes Without SET Button
1. Choose and press a device key i.e TV. LED will flash once.
2. Press and hold BOTH the CHANNEL UP AND VOLUME DOWN button until the LED Lights up.
3. Enter the 4-digit Device code (refer code list).
4. The LED will flash once as each number is programmed, at the end of the 4th digit the LED will turn off immediately if correct. If the LED flashes then something went wrong in the process. If the first code does not work then repeat the process with the next.
5. Important - Some brands use other manufacturers to make their devices if the codes available do not work the try the MAGIC search function.

MAGIC SEARCH FUNCTION
1. The magic search function enables you to scroll through the entire code list one by one by pushing the on/off button. Each time you push the on/off button the remote automatically switches to the next code in the list and sends a signal to the device you have chosen.
2. Choose and press a device key i.e TV. LED will flash once.
3. Press and hold the SET button or if no SET button then hold BOTH the CHANNEL UP AND VOLUME DOWN button until the LED Lights up.
4. Enter the 4-digit Device code (refer MAGIC list) i.e TV is 0001.
5. The LED will flash once as each number is programmed at the end of the 4 digit the LED will turn off immediately if correct. If the LED flashes then something went wrong in the process.
6. Start scrolling by pushing the ON/OFF button as soon as your TV or Chosen device turns OFF lock the code in by pushing the DEVICE key again.

You likely don't need a new remote. Certainly not a Universal.

Samsung remotes for LED / LCD TVs are generally RF, not IR.
Most Universal remotes do not generate RF signals, so disregard advice about codes for Universals.

Try this:

First, fresh batteries, and clean battery contacts if needed.

Then, Try Pairing procedure:

1. TV off
2. Bring remote within 3 feet of TV
3. Push Pairing button (Paper Clip or other pointed object in button hole)
4. Turn on TV
5. Should be paired. Try remote channel or other buttons.
6. If not, try 2 more times.
7. If still not working, push RESET button first and repeat Pairing.

Please rate if Helpful.

Good Luck !!

Sounds like problem is with TV. Make sure the remote sensor on the TV is not blocked, it is located at the lower right part of the front of the TV.

turn on manually your set (tv), push the code button on your remote control until led light, release the button, the led still ligth. push the tv button one pulse, push the power button several times until tv turn off. when this happen push enter button... try turn on the tv with remote control.