Televison & Video Logo

Related Topics:

Salvatore Esposito Posted on Apr 30, 2017

Hi I have a lg smart tv model # 65UF6450-UA when I turn it on the red light blinks three times but there's no picture or sound . Do I need a new driver board?

2 Answers

Roe Rodriguez

Level 1:

An expert who has achieved level 1.

Welcome Back:

Visited the website for 2 consecutive days.

  • Contributor 1 Answer
  • Posted on Jun 18, 2019
Roe Rodriguez
Contributor
Level 1:

An expert who has achieved level 1.

Welcome Back:

Visited the website for 2 consecutive days.

Joined: Jun 17, 2019
Answers
1
Questions
1
Helped
873
Points
1

I have the same tv same problem. This is what I did . I removed the main board. Preheat your oven to 385. Place the main board on top of a piece of cardboard. Then on top of a baking sheet. Bake it for 10 mins. Open the oven and let it cool for 20 mins. Re install. This worked for me. Tv turned on and works. The problem seems to be the solder under the processor chip overheats and cracks overtime. When you bake it, it re solders the chip and makes connection. Hope it helps you. Btw. I had to bake mine twice, the second time I turned the oven up to 400. Temps differ from every oven.

Paul Carmichael

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

  • Contributor 13 Answers
  • Posted on Apr 30, 2017
Paul Carmichael
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Joined: Apr 30, 2017
Answers
13
Questions
0
Helped
5378
Points
53

Smart tv's have their own built in computer and as with any computer they can get confused and don't know what to do.a simple thing to try is unplug your tv completely from power source including a power strip. hold the power button down for at least 60 seconds plug it back in see what happens. don't cost anything to try this.

Ad

5 Related Answers

Anonymous

  • 10594 Answers
  • Posted on May 13, 2009

SOURCE: red blinking light three times pause then three

Make sure that lamp door is fixed securely and pressing lamp door switch as 3 times blinks shows lamp door switch is not On.

Ad

Matthew Boulden

  • 440 Answers
  • Posted on Jun 21, 2009

SOURCE: red light blinking 7 times on Sony Triniton Wega TV

This means one of three things, either the lamp is bad on your tv, the ballast that powers the lamp is bad or the safety switch for the lamp door is not depressed or it has come un-plugged. It could also mean the power supply or fuse on the power board is blown. I am assuming this is a DLP tv, and if so, it is fairly easy to fix it or find parts for it online. If you are slightly mechanically inclined, want to save money and dont mind paying attention to detail then you can fix it yourself. If you need help dont hesitate to ask.

Chi Chu

  • 8457 Answers
  • Posted on Apr 07, 2010

SOURCE: Tv turns on green light blinks three times then TV turns off

Ur power supply board is dead.Tries websites Shopjimmy.com,Ebay.com to buy a refurbish power supply board for the replacement.

Anonymous

  • 1 Answer
  • Posted on Sep 20, 2010

SOURCE: loud pop...LG Model 50PQ30-UA Standby light blinks on/off

this **** dont mother ******* work **** ALL YALL HOES how u like that

Anonymous

  • 4889 Answers
  • Posted on Dec 12, 2010

SOURCE: My LG HD TV Model

Please let me know how many times it blinks in between each pause so that I can tell you what the problem is.

Sai.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

LG LED Smart TV model 42LB5800-UG won't turn on but red light flashes 3 times then off

On this model LG TV 3 blink code is bad LED lamps in the panel. New strips can be purchased from shipjimmy
0helpful
3answers

My LG 50uh5500-ua tv does not turn on. No picture or sound. When power button is pushed red light blinks 3 times then goes off. Any suggestions or theories?

I had the same problem, changed the power board, main board and t con board. I purchased the led light tester, one string of lights was out. Replaced the lights, and 1/2 of the tv worked. I broke the black tab that connects the ribbon connector to the bottom panel. What a learning experience. Now I have to figure out how to change the ribbon connector.
2helpful
3answers

Lg tv blink codes

Take the screen off connect power and watch LEDs if any don't flash its LEDs only needed to change faulty strip if they all flash its probably t con boards.
0helpful
1answer

Have LG 42LD450-UA lcd tv that has no picture or sound. When plugged in the red power light comes on but when it's turned on the red light flashes very slowly continuously. Thanks in advance

These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. http://electronicshelponline.blogspot.com/
Blinking codes details of many popular brand TVs are given. Surf the site with patience. If blinks continue without any pause, the main board is faulty.
0helpful
1answer

New to this site! Hope someone has an answer that can help... I have a LG 55 LCD flat screen model 55LD520-UA. Try to turn it on. Bottom light blinks red 3 times blinks blue once, then nothing.

Hi,
Try to change the capacitors first. Normally lost of lcd tv have problems with the capacitors and which lead to powers problems. May you will not find visually that the capacitor is fault. So go for changing the capacitor also check the following video. Which will help you understand how to check the power supply broad. Also take care while working with the power board there is a risk or electric shock Also one of the capacitor in the power supply holds charge even when you have remove the power supply.
Testing LCD TV Power Supply BoardsSTEP BY STEP

www.electro-medical.blogspot.com
0helpful
1answer

I have a 15 inch TV LG Smart TV something went out on it what could it be the model number is 50LN5700UH the LG light comes on but no picture

LG TV : Picture not coming on screen, but TV is on. - Forums - CNET

www.cnet.com > Forums > LG

CNETJul 14, 2014 - Dear All, Have a peculiar problem with my LG flat screen TV. It stopped working suddenly, that is no picture when switched on, I noticed the ... However, in my case the RED light keeps on blinking and there is a ticking sound ... LG Plasma Flat Panel 42PC3D - No picture just sound
Jun 11, 2015
No Picture from LG 50PS60 Plasma TV
Nov 16, 2013
More results from www.cnet.com

LG LCD TV REPAIR - NO PICTURE SCREEN FIX REVIEW ...

? 5:29
www.youtube.com/watch?v=PWoz_-3OHIM
Jan 25, 2013 - Uploaded by Tampatec Common LG LCD TV REPAIR - NO PICTURE OR BLACK SCREEN FIX ... came on good with green light working properlybut still no picture.
0helpful
1answer

The cause of problem with an LG LED smart tv

LG TV 3 blink code is due to bad power supply or LED lamps in the panel. If you have technical skills of soldering, physically check and replace if you found bulging capacitors in the power supply. If PSU is working, check LED back light strips with LED tester and replace faulty LED back light strip.
0helpful
1answer
Not finding what you are looking for?

883 views

Ask a Question

Usually answered in minutes!

Top LG Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Kolbrun...

Level 3 Expert

1228 Answers

Are you a LG Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...