How do I turn OFF the audio description on my new Panasonic 50 inch TVs.

IN settings check for audio, make sure not set for external or headphones.

These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. http://electronicshelponline.blogspot.com/
Blinking codes details to many popular brand TVs are given. Surf the site with patience.

7 blinks Driver SOS 2 SU / SD / SS Boards. (SC floating voltage area)
This is the fault. 7 blinks of standby light denotes it. If you wish to get more details about the blinking codes to Panasonic TVs, check the site linked here. It has details and some troubleshooting hints. google.com/+GopakumarGopalan

Visit the site named 'Electro-help' for more details. Check this link and select the site named above. View it in 'Flip card' option, which can be selected from the drop down box menu by the [Sidebar] tag, at the left top left corner of the display window. It will make search easy. Some times, the ads attached with each posts both at the right and bottom, might help you to find the availability of spare parts. There are more than 640 posts to different brand TVs now. Will be updated daily. Detailed description about common faults to Plasma TVs are described here in detail. It is very difficult to type all of them here.

It should be due to its Y-Sustain and drive boards. Just enter this site named 'Electro-help'. You can see so many problems that can occur with Panasonic plasma TVs and description related faulty boards . Try this link and select the site. Pull up older posts there.

iv got a panisonic i dont know if its the same but i click on the options buttion witch takes me to the options menu
then it says ad in the multi audio/ad box change this to eng

blinkin de red led tv panasonic plasma

http://www2.panasonic.com/consumer-electronics/support/Televisions/LCD-Projection-TVs/model.PT-50LCX63
http://www.retrevo.com/support/Panasonic-PT-50LCX63-TVs-manual/id/275dj691/t/2/
http://www.eserviceinfo.com/downloadsm/41128/SONY_Projection.html
http://www.scribd.com/doc/3507976/Panasonic-103-INCH-Display-Monitor-TV-Plasma-Training-Manual
use these links and manuals to sort your fault.

Philips 50 inch plasma tv no video but has sound

You should call for warranty service. If the set is very new try to get it exchanged.

There are some very heavy duty power supplies and many high power matrix drivers used in Plasma sets.

The description sounds like the noises are very loud. It is normal with any of these TV sets, if you put your ear right up to the back of the set at the vent holes you will hear some noises. These would be some acoustic harmonics from the power supplies and related circuits.

I am wondering if it is possible that there is something that is becoming less stable. If the set is working very well without any failure, so-far this is a very good sign. Before it gets to be a problem, I would have this checked.

On many models of these sets, they use fans for cooling specific areas. A bad fan can cause noise.


Jerry G.