Hou to install printronix p5005b printer - Printronix Line Matrix P5005B Printer

please send the setup of wep printronix p5005b

Hi,

Please follow this link for download of driver which is you want?

http://www.freshwap.net/fe2/dl/DRIVER+PRINTRONIX+P5005B

thanking you

davevipul197

Remove the ribbon and check for play when turning the plastic ribbon hub by hand. If it is loose try tightening with a torx bit. But it is probably cracked and needs to be replaced.

suttel jam error

If using RS 232 serial communications, verify that host and printer settings match. Baud Rate, Parity,Stop Bits, 7or 8 bit word length. Example 9600,8,n,1

Or make sure it is not in hex dump mode.

You can download the printer driver from the link below

http://www.printronix.com/products/productdrivers.aspx?id=4108

Hope this helps.

Please contact me I can help you out.

Rory Cardenas
Midrange Repair and Parts
Alsip Il 60803
708-597-4222 x240
[email protected]
AOL IM: RORYMRP

You have probably tried to reflash the printer with a firmware level that the printer does not support for that Security PAL. Printronix requires a specific Security PAL to 'unlock' the firmware so you can use the printer. I would get the original firmware for the printer or purchase the upgrade if you are trying to get some specific option to work.

The flash memory has probably been erased (assuming no one remove the memory module).

Your Printronix service technician can diagnose and reflash if needed.

Steve W
LazerTek LLC

yeah I ran into this once, set the printer up to ethernet and not auto switching, i think thats what it was.