At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
I have replaced all the ink cartridges with new ones and the Cyan one still shows that it is fully empty. The red light is on on my RX425 and the printer will not print. I have replaced the Cyan cartridge with another one and it still shows it as empty. I have switched the printer on and off a few times, bu the red light is still on. Is there anything that I can do?
Show empty or not recognized (cross sign)? Check connector at chip and at head carriage. Do replacement procedure form status monitor (how to..). Do replacement ink tank one by one with cyan ink first.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi there, No Cartridge will show on the display if the machine cannot recognize one of the cartridge or one of the ink is empty. To make sure about the real issue unplug the mach from the power outlet then plug it back in after 10 seconds. If the display show:"ink empty C" it means the cyan/blue needs to be replace. "ink empty M" it means the magenta/pink needs to be replace. "ink empty BK" it means that the black needs to replace. If the display shows "ink empty Y" it means that yellow needs to be replace. Even if it looks like the cartridge is full, it really needs to be replace so that the machine will work again. Hope this helps. Rate if it works. Thanks
maybe the cartridge is wrong, release it and clean the electrical contacts, put them again one by one, if notting happen, try this
Solution
As the printer operates, it moves ink from the ink cartridges into a printhead reservoir. The printer does not deliver a message when an ink cartridge goes empty, because it still has ink in the reservoir. The printer continues printing until the ink level in the reservoir falls to a first trigger point - then a message appears advising the printer owner to Replace Cartridges Soon . At this point, other cartridges that are empty but have not reached the trigger point are also mentioned in the message, to save trips to the retailer. After the first trigger point, the printer can continue printing until ink levels in the reservoir reach a second trigger point. At the second trigger point there is only enough ink left to perform vital servicing tasks, and a new message appears, saying Ink Cartridges Empty . The options offered depend on the usable inks remaining. If no options are offered, the cartridges indicated must be replaced before printing can continue.
The Ink Cartridges Empty options are described in the table below:
Ink colors outOptionPrint mode possible
All
Cancel
None
Black
AND
Cyan, Magenta, or Yellow (any or all)
Black only
Continue with other colors
Cyan/Magenta/Yellow mode (composite black)
Text and photo quality will differ from those printed when all colors are available
Light Cyan or Light Magenta (either or both)
Cyan, Magenta, or Yellow (any or all)
(Black still available)
Print with black ink only
Grayscale
Cyan is the "blue/green" ink cartridge which is required to print in full color. Some printers stop working when one or more ink cartridges is empty. Get a complete set for some savings and for the next cartridge that gets empty. Printers are cheap now, it's the ink that gets costly.
No. You need all the cartridges installed with functioning chips for your printer to work. The reason why you need all the colors when all you print is black is because a small amount of color prints when you print black. The manufacturers want to make up their R&D costs on the printers by selling lots of expensive ink.
Ye of course it could be faulty and Epsons are sometimes very fussy about using third party carts. Get it replaced at your store, try a different brand or buy a genuine Epson cart if you can afford it.
Follow the steps below to remove and replace the empty ink cartridge.
Turn the printer on.
Open the ink cartridge door.
Figure 1: Opening the ink cartridge door
Squeeze the gray tab below an ink cartridge slot to release the gray latch and then lift the latch.
Figure 2: Lifting the latch1 - Ink cartridge latch for the black ink cartridge2 - Ink cartridge latches for the color ink cartridges NOTE:
Theink cartridge areas are color-coded for easy reference. From left toright, the ink cartridges are black, yellow, light cyan, cyan, lightmagenta, and magenta.
Pull the ink cartridge toward you out of it's slot to remove it.
Figure 3: Removing an ink cartridge
Remove the new ink cartridge from the packaging.
Hold the ink cartridge by the handle and then slide the ink cartridge into the empty slot.
NOTE:
Makesure that the ink cartridge is inserted into the slot that has the sameshaped icon and color as the ink cartridge. The copper-colored contactsshould be facing the printer as the ink cartridge is inserted.
Figure 4: Inserting an ink cartridge
Press down on the gray latch until it clicks into place.
Figure 5: Closing the gray latch
Repeat steps 3 through 7 for each ink cartridge that needs to be replaced.
NOTE:
All six cartridges must be installed. The printer will not work if an ink cartridge is missing.
Close the ink cartridge door.
after Doing this all Follow the next step :-
Please Try This, I am sure it is going to workout.
Resetting the All-in-One Press the On () button to turn off the unit.
Disconnect the power cord from the back of the unit.
Replace the ink cartridges (from the manual for the printer)
Follow these instructions when you need to replace ink cartridges.
To replace the ink cartridges
1. Make sure the HP All-in-One is turned on. 2. Open the ink cartridge door by lifting from the front center of the device, until the door locks into place. 3. Squeeze the tab below an ink cartridge to release the latch inside the HP All-in-One, and then lift the latch. If you are replacing the black ink cartridge, lift the latch on the far left. If you are replacing one of the five color ink cartridges, such as yellow, light cyan (blue), cyan, light magenta (pink), or magenta, lift the appropriate latch in the center area. 4. Pull the ink cartridge toward you out of its slot to remove it. 5. Remove the new ink cartridge from its packaging, and then, holding it by the handle, slide the ink cartridge into the empty slot. Make sure that you insert the ink cartridge into the slot that has the same shaped icon and color as the one you are installing. 6. Press down on the gray latch until it clicks into place. 7. Repeat steps 2 through 5 for each ink cartridge you are replacing. 8. Close the ink cartridge door.
×