Question about Alcatel Lands Phones

Open Question

Pressing preset Speed Dial number on my Alcatel 392g causes a numeral to appear on Screen

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
Ad

Anonymous

  • 75 Answers

SOURCE: Edit number stored in speed dial

all you need to do is push and hold the speed number button that you what to chang till it starts blinking in the display. i think the name comes up 1st. press enter if that's o.k. ore use the courser to delete. if you have pressed enter then the number show-es up press the arrow key back to erase @ enter the correct numbers. hit enter key. if you git in to something you don't know press the stop key 2 times will git you back to main screen

Posted on Nov 26, 2008

Anonymous

  • 1 Answer

SOURCE: dialing presets

Hi John, you posted this a LONG time ago.. but I will add a sollution incase anyone needs to find out in future..

to add a number (i.e 01234567890)

1. Lift the handset
2. Press the 'STORE' key, then enter 01234567890
(the number will not be physically dialed - rather, the telephone is memorising it internally)
Press the 'STORE' key again after you enter the number
then select the button you wish to locate it to.

i.e : 'STORE' » enter telephone no. » 'STORE' » Press desired memory button..

Hope this helps
Kevin (In Dublin, Ireland)

Posted on Jan 09, 2009

Chris

  • 15 Answers

SOURCE: Need to program numbers in speed dial (or replace lost manual).

Hi,

If you go to the following webpage there is a link to the manual:

http://www.amazon.com/exec/obidos/ASIN/B00005NGRJ/plaza101-20/ref=nosim/

It is under the 'Product details' section. The section on managing the memory start on page 34.


To change a stored number you just follow the initial instructions, namely:

1. Press the STORE button. ENTER TEL. NO. is displayed.

2. Use the keypad to enter the phone number. If you
want to add spaces instead of dashes in the number,
it will dial correctly.
• To scroll forward or backward, use NEXT or
PREVIOUS.
• To erase the current digit, press ERASE.

3. When finished, press STORE. ENTER NAME is
displayed.

4. Use the keypad to store a name (up to 16 characters).
More than one letter or character is available in each
of the number keys. For example, to enter the letter
“A,” press the 2 key once. For a “B,” press the same
key twice. For a “C,” press it three times.
• To add a space, press NEXT.
• To scroll forward or backward, use NEXT or
PREVIOUS.
• To erase the current digit, press ERASE.

5. When finished, press STORE. MEMORY LOCATION is
displayed.

6. Press the memory location number (0-9 or A, B, C) to
store the number.

I hope this helps you.

Posted on Aug 05, 2010

emma1201

  • 1 Answer

SOURCE: I just got a samsung Shark GT-S3550. How do I use

samsung shark gt-s3550
Hi, there seems to be a problem with my phone,I am unable to view messages, it just doesnt open the inbox at all. I have tried anything else on the phone. Is there anythin useful you can tell me?

Posted on Feb 08, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a manual for modelA392G.


manual for modelA392G. Gerald, Check the attached links,manual, instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Alcatel A392G User Manual Table Of Contents
http://cellphoneusermanuals.com/download-online/alcatel-big-easy-flip-phone-392g-user-manual
https://www.tracfone.com/models/phoneModels.jsp?brandName=TRACFONE#

May 15, 2016 | Alcatel Cell Phones

1 Answer

I cannot find how to set up speed dial on this phone


Yup, you can set a maximum of 8-speed dial entries.

1. From the main menu, select Settings > Phone settings > Keypad > Numeric keys.
2. Highlight the key with which you wish to assign the speed-dialing number (from 2 to 9), pressEdit > Contacts.
3. Scroll to choose a contact you want to assign from Contacts and press OK.

Oct 23, 2015 | Tracfone Wireless Alcatel A392G...

1 Answer

Alcatel cel ph model OT510APIB procedure for turning off emergency speed dial number


Please go to "Menu"-> "Settings"-> "Call settings" -> "Speed dial"->Select a number -> "Options"->"Edit", then select a contact number.

you must do this for every speed dial number you wish to delete!

Easy as...

Mar 11, 2015 | Alcatel Lands Phones

1 Answer

Tracfone customer service


Try holding the number for 1-2 seconds instead of just pressing it.

Aug 21, 2014 | ALCATEL-LUCENT USA INC A382G The Big Easy...

2 Answers

How do I set my speed dial numbers?


Which ones? System speed is programmed from station 10 or 11 and goes in the 6xx's, depending on your version of software. The start is FEATURE 00 FEAT 6xx and dial the number You can continue programming more numbers by pressing FEAT 6xx or Feat 00 to exit.

Personal speed dial numbers are programmed similarly, except they are in locations 80-99 on each phone and can be programmed from the phone if it's a system phone.

Auto Dial buttons use blank buttons on your set. Feature 00 pressing the button and dialing the outside number store those. Again, Feature another button will let you program another button, or Feature 00 ends programming.

Carl



Jul 12, 2011 | Lucent PARTNER18 Corded Phone

1 Answer

How do you set up for speed dial with the alcatel ot-808


go to SETTINGS.
scroll down to KEYPAD.
scroll down to NUMERIC KEYS.
and there you are, add your numbers by nitting the center button and EDIT then pick a number from your directory, etc.

Dec 26, 2010 | Alcatel Cell Phones

1 Answer

How do I set and save a fax number as a speed dial


You can download the User Manual from here (temporary link): http://dl.dropbox.com/u/1322442/CANON%20CFX-L4000.pdf


Here is a transcript:


Storing Numbers for One-Touch Speed Dialing


Your Canon fax can store up to 120 phone numbers: up to 20 of your most frequently used numbers can be stored for One-Touch Speed dialing, and an additional 100 numbers can be stored for Coded Speed Dialing.



1. Press SET and DATA REGISTRATION

The display will show:

DATA REGISTRATION

1. SPEED DIAL SETUP


2. Press SET twice.


The display will show:

1-TOUCH SPD DIAL

01

3. Use the search buttons (up and down symbols) to select a One-Touch Speed Dialing button between 01 and 20.


The display will show:

1-TOUCH SPD DIAL

[1...7]


??¢ You can also do this by pressing FUNCTION, then pressing the One-Touch Speed Dialing button, then pressing FUNCTION again.

??¢ If a number is already stored at the button you select, that number appears.

??¢ If the button you select is registered for Group Dialing, GROUP DIAL appears.

4. Press SET twice. Use the numeric buttons to enter the fax number you want to store.


The display will show:

TELEPHONE NUMBER

TEL =


??¢ Press SPACE to enter spaces between numbers. (Spaces are optional and are ignored during dialing.)

??¢ If you want to clear a number or a mistaken entry, press CLEAR.

??¢ To enter a pause in the number, press PAUSE one or more times

Sep 22, 2010 | Canon CFX-L4000 Plain Paper Laser Fax

1 Answer

How do i store numbers? there is no manual.


You can download the User Manual from here (temporary link): http://dl.dropbox.com/u/1322442/CANON%20CFX-L4000.pdf


Here is a transcript:

Storing Numbers for One-Touch Speed Dialing

Your Canon fax can store up to 120 phone numbers: up to 20 of your most frequently used numbers can be stored for One-Touch Speed dialing, and an additional 100 numbers can be stored for Coded Speed Dialing.



1. Press SET and DATA REGISTRATION

The display will show:

DATA REGISTRATION

1 .SPEED DIAL SETUP


2. Press SET twice.

The display will show:

1-TOUCH SPD DIAL

01

3. Use the search buttons (up and down symbols) to select a One-Touch Speed Dialing button between 01 and 20.


The display will show:

1-TOUCH SPD DIAL

[1...7]

??¢ You can also do this by pressing FUNCTION, then pressing the One-Touch Speed Dialing button, then pressing FUNCTION again.

??¢ If a number is already stored at the button you select, that number appears.

??¢ If the button you select is registered for Group Dialing, GROUP DIAL appears.


4. Press SET twice. Use the numeric buttons to enter the fax number you want to store.

The display will show:

TELEPHONE NUMBER

TEL =

??¢ Press SPACE to enter spaces between numbers. (Spaces are optional and are ignored during dialing.)

??¢ If you want to clear a number or a mistaken entry, press CLEAR.

??¢ To enter a pause in the number, press PAUSE one or more times

Sep 17, 2010 | Canon CFX-L4000 Plain Paper Laser Fax

1 Answer

How do I save a number


You can download the User Manual from here (temporary link): http://dl.dropbox.com/u/1322442/CANON CFX-L4000.pdf


Here is a transcript:


Storing Numbers for One-Touch Speed Dialing

Your Canon fax can store up to 120 phone numbers: up to 20 of your most frequently used numbers can be stored for One-Touch Speed dialing, and an additional 100 numbers can be stored for Coded Speed Dialing.


1. Press SET and DATA REGISTRATION


The display will show:

DATA REGISTRATION

1 .SPEED DIAL SETUP

2. Press SET twice.


The display will show:

1-TOUCH SPD DIAL

01

3. Use the search buttons (up and down symbols) to select a One-Touch Speed Dialing button between 01 and 20.


The display will show:

1-TOUCH SPD DIAL

[1...7]

• You can also do this by pressing FUNCTION, then pressing the One-Touch Speed Dialing button, then pressing FUNCTION again.

• If a number is already stored at the button you select, that number appears.

• If the button you select is registered for Group Dialing, GROUP DIAL appears.

4. Press SET twice. Use the numeric buttons to enter the fax number you want to store.


The display will show:

TELEPHONE NUMBER

TEL =

• Press SPACE to enter spaces between numbers. (Spaces are optional and are ignored during dialing.)

• If you want to clear a number or a mistaken entry, press CLEAR.

• To enter a pause in the number, press PAUSE one or more times

Aug 19, 2010 | Canon CFX-L4000 Plain Paper Laser Fax

1 Answer

Group code


I believe what you want is at the bottom of this list.

If you frequently send faxes to the same group of telephone numbers, you can assign these numbers to a group.
Only Speed Dial and One Touch numbers can be assigned to a group. A maximum of 25 Group Numbers (WorkCentre Pro555) / 50 Group Numbers (WorkCentre Pro575) can be assigned (in the range 1-1999). Preset group numbers can also be used for polling.
The following information is included below:
  • Create a new group
  • Add numbers to an existing group
  • Delete numbers from an existing group
  • Delete an existing group
To print the Group Phonebook, see the Related Items below for additional information.
Create a new Group:
  1. From the Standby Mode, press the [Menu] (up arrow) button on the Control Panel, then press [3], [3].
  2. Use the numeric keypad to enter the Group Dial number (1-1999) you want to assign to this group.
  3. Press the [Enter] button. The screen will display a name.
  4. Use the numeric keypad to enter the Group Name (20 characters maximum), then press [Enter].
  5. Press the One Touch button you want to include in this Group, or enter the Speed Dial number, then press [Enter].

    NOTE: The One Touch and Speed Dial numbers must already be programmed. See the Related Items below.

  6. Repeat step 5 to enter additional numbers.
  7. When you have entered each number you want to include in this group, press [Enter].

    NOTE: Group Transmissions are easier if a group is linked to a One Touch button.

  8. To assign this group to a One Touch button, press the One Touch button. To skip this step, press [Enter].
  9. Press the [Exit] or [Stop] button to return to the Standby Mode.
To add numbers to an existing Group:
  1. From the Standby Mode, press the [Menu] (up arrow) button on the Control Panel, then press [3], [3].
  2. Use the numeric keypad to enter the Group Dial number (1-1999) you want to assign to this group.
  3. Press the [Enter] button.
  4. Press [2] to modify this group.
  5. Use the numeric keypad to enter a new group name, then press [Enter], or press [Enter] to retain the old name.
  6. Press the One Touch button you want to include in this Group, or enter the Speed Dial number, and then press [Enter].

    NOTE: The One Touch and Speed Dial numbers must already be programmed. See the Related Items below.

  7. Repeat step 6 to enter additional numbers.
  8. When you have entered each number you want to include in this group, press [Enter].
  9. Press the [Enter] button.
  10. Press the [Exit] or [Stop] button to return to the Standby Mode.
To delete numbers from an existing Group:
  1. From the Standby Mode, press the [Menu] (up arrow) button on the Control Panel, then press [3], [3].
  2. Use the numeric keypad to enter the Group Dial number (1-1999) you want to assign to this group.
  3. Press the [Enter] button.
  4. Press [2] to modify this group.
  5. Use the numeric keypad to enter a new group name, then press [Enter], or press [Enter] to retain the old name.
  6. Press the One Touch button you want to delete from this Group, or enter the Speed Dial number, and then press [Enter].
  7. Press [1] to delete this number.
  8. Press [Enter] to delete the number, or press the [Exit] or [Stop] button to exit without deleting number.
  9. Repeat steps 5 through 7 to delete additional numbers.
  10. When you have deleted each number from this group, press [Enter].
  11. Press [Enter].
  12. Press the [Exit] or [Stop] button to return to the Standby Mode.
To delete an existing Group:
  1. From the Standby Mode, press the [Menu] (up arrow) button on the Control Panel, then press [3], [3].
  2. Use the numeric keypad to enter the number of the Group you want to delete, then press the [Enter] button.
  3. Press [1] to delete the group number.
  4. Press the [Exit] or [Stop] button to return to the Standby Mode.
elem_1_spacer.gif Related Items:> See AlsoHow To Print and Read the Group Phonebook Report
> See AlsoHow To Modify the Default Resolution and Contrast Settings
> See AlsoHow To Assign / Modify Speed Dials in the Phonebook
elem_1_spacer.gif elem_1_spacer.gif

Dec 11, 2008 | Xerox WorkCentre Pro 575 Plain Paper Laser...

Not finding what you are looking for?
Lands Phones Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Alcatel Lands Phones Experts

Ekse

Level 3 Expert

13434 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14826 Answers

ray gallant

Level 3 Expert

66126 Answers

Are you an Alcatel Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...