How to hard reset symbol mc40n0 that has an encrypted password. Forgot password

GSN games: just click the forgot password link, and do what it says. Usually it send you a reset link to your email address...where you can pick a new one. Sometimes it will send you a temp. password...use that to log in, then go to profile and set a new one. These days you need to keep track of passwords somehow. Either an encrypted (locked) file on your desktop, or if you have Apple, they have keychain (which saves them encrypted, and is safe) or if you use windows, chrome browser uses and encrypted file, so you can just save them, or Norton's vault...lots of ways to remember them. Pick one, and use it.

PayPal ...same thing. Click log in, and then click the "Forgot your email or password?" link and it give you reset instructions in your email.

1 problem is I cannot verify that you really are the owner of this tab. But you should be able to do a hard reset by a turning off the tab, holding the power, volume up and home button all at the same time until it resets.

Every router I have ever seen allows you to reset the configuration to factory default - but not allow you to retrieve a forgotten password and maintain your settings at the same time. This is often referred to a "factory" or "hard" reset.

When you initiate a factory / hard reset, typically by pressing & holding a button on the router - or behind an opening in the router case - all the changes you've made to it will be returned to the factory default. Wifi becomes "open" with no password (on most devices), the login username / password also go back to default settings (common ones are: admin / admin, admin / password, <blank> / admin, <blank / password, etc.). Consult your router's set up guide or online documentation to learn what the factory / hard reset procedure and the default settings.

Once you gain access to the setup pages of the router, configure it as best as you can remember, and lock it down with good security settings. At minimum - this should include changing the router's username / password, the WiFi's SSID and do not broadcast it, add WPA or WPA2 encryption and secure it with a security key (use a mix of numbers, letters, symbols etc.).

I suggest recording the settings on paper and then tape it to the bottom of the router. There it will remain out of sight - but ready when you need it.

Good luck!

You forgot your BIOS (UEFI) password? The OS password? It matters! Try searching for terms like 'uefi password reset Galaxy III' and see what's relevant, or give a better explanation of circumstances. If you didn't set another account and ordered hard enough encryption, you might not be able to reset it; but a little time in exercises jogging your memory might avail fine.

YOU can't. Password was used to encrypt your stored data. Find the "masterkey" password of the software first.

Your can low level format the HDD but you will lose all data.

there is some software you can download
http://majorgeeks.com/Dr._Freeware_System_Utilities_d6416.html Dr.Freeware System Utilities which includes data recovery software, data backup, password reset tools for Windows helps you to maintain your system. Dr.Freeware is freeware, you can download and use it for free.

Support IDE/SATA/USB Hard Drives, memory cards, USB Memory Drives
Windows Password Cleaner
Available in Live CD to run offline

This is a utility to blank the password of any user that has a valid (local) account on your Windows system.

You do not need to know the old password to blank the password.

Support Windows NT/2k/XP/Vista
Support IDE/SATA/USB Hard Drives

Hope this helps

Sorry but this is the only to reset the password

Press the Reset Button for approximately 10 seconds

Resetting the Router will erase all of your settings (WEP Encryption, Wireless and LAN settings, etc.) and replace them with the factory defaults.

To unlock your laptop using the easiest method available go to: http://dell-inspiron-1100-bios-password.biospwd.com

Dell password authentication system explained :

The BIOS of most modern computers also allow a password to be set for each of the connected hard drives. This password is stored in the service area of the hard disk. Because of this, moving the password protected hard drive to a new computer does not allow access to the hard drive unless the password that was assigned to the hard drive is provided.
The ATA Security Mode Feature Set that is implemented in all modern hard drives actually provides for two passwords, a "Master Password" and a "User Password"
The User Password locks the hard drive and the Master Password is only used to allow an administrator to reset the user password.
The BIOS of many computers will not allow the master password for the hard drive to be changed from the default, so they rarely are. A quick search of Google.com for the specific model of hard drive with the phrase "ATA Master Password" will generally result in multiple web pages that contain the default master password . Hardware tools can recover, reset, or brute-force both the User and Master Passwords.

Full Disk Encryption Methods:

There are two major categories of full disk encryption (FDE)-software-based and hardware-based. Software-based encryption modifies the hard drive drivers and uses the CPU to encrypt all data as it is written to the drive and decrypt all data read from the hard drive. Hardware-based full disk encryption is built into the hard drive and is totally transparent to the user and does not impose a performance impact on the computer.
Software-Based Full Disk Encryption
Wikipedia maintains a lengthy list of disk encryption software The two most popular FDE software implementations are TrueCrypt and BitLocker. BitLocker is included as a feature in the Ultimate and Enterprise editions of Microsoft Windows Vista and Windows 7, but has to be enabled and configured to provide protection. TrueCrypt [18] is free open source software that is ideal for individual users, but lacks management features that make it attractive to enterprise-wide deployment.
Deployment of software-based full disk encryption in any organization with more than just a few computers requires careful consideration of how the encryption keys will be managed. Great encryption without proper key management is like locking the doors to your house and leaving the key under your doormat. One study on the usage of encryption states that 54 percent of respondents had experienced either stolen or unaccounted for encryption keys and that 78 percent experienced system downtime due to encryption failures in the past twelve months [20]. Full Disk Encryption solutions that are targeted at the enterprise typically offer integration with Microsoft's Active Directory or other LDAP directories for secure key management.
In 2008, security researchers created shockwaves by publishing a paper called Lest We Remember: Cold Boot Attacks on Encryption Keys [21]. This paper, and the accompanying YouTube video demonstrate how Software-Based FDE can be circumvented by rebooting a computer that has been left in a locked-screen or sleep state. The attack exploits the fact that Dynamic Random Access Memory

Visit seagate website else format in dos prompt

I got the following from the windows help and support:

OPTION 1
Using a password reset disk is the best solution.

1. If you have typed the wrong password, you'll get a message that says your user name or password is incorrect. When this message appears, click OK.
   
2. Click Reset password, and then follow the instructions.
   

OPTION 2

If there is another administrator account on the computer, that administrator can change the password for the account you can't remember the password for. If you do this, however, you will lose access to any encrypted files, encrypted e‑mail messages, and passwords stored on this account. If you don't have encrypted files or stored passwords, then this option will work for you


OPTION 3

If you don't have a password reset disk or another administrator account, you won't be able to reset the password. If there are no other user accounts on the computer, you won't be able to log on to Windows. In this case, you will need to re-install Windows.