When i plug-in the network cable from PC to Ricoh Aficio 1027, the PC show up network disconnect ( vista OS), if (XP OS) will work properly. i also try unplug network cable from Ricoh Aficio 1027 and plug in to DSL mordem, the PC show up network connection. i already try many time but the problem still same...
It will not work to directly connect a network cable directly from the network port of the printer directly to your computer. You will have to use a cross-over cable and configure your TCP/IP settings manually. However, to utilize network printing and have internet access, you will want to get a router and connect your modem to the ethernet port of the router, then a network cable from pc to switch port on router, and a network cable from printer to a differnt switch port on router. Most consumer routers have a built in 4-port switch, so that should allow enough connections. You may want to consult a local IT company or Ricoh dealer for the rest of the setup. This will allow the framework for network printing and/or scanning.
1,101 views
Usually answered in minutes!
×