Cardio Zone has an error code of E 22 what does this mean

The E1 error code on a Comfort Zone CZ220 heater indicates a problem with the high-temperature limit switch. This switch is a safety feature that shuts off the heater if it overheats.
To clear the error code, you can try resetting the heater by unplugging it from the power outlet and waiting for at least 30 seconds before plugging it back in. If the error code persists, it may indicate a more serious issue with the heater that requires professional repair.

GOOGLES ANSWER TO QUESTION BELOW
https://www.google.com/search?q=What+does+ERROR+CODE+e05+means+in+%22KONKA%22+WASH+MACHINE&oq=What+does+ERROR+CODE+e05+means+in+%22KONKA%22+WASH+MACHINE&aqs=chrome..69i57&sourceid=chrome&ie=UTF-8

Mentioned here, fuel injection issues.
http://www.jep.co.nz/jepco/News/Paisley%20news%20issue%2011.pdf

https://www.google.com/search?q=nissan+elgrand+error+codes+18+and+22

..

"Error 22" on a Pioneer usually means an unsupported CD format. The disc you are trying to play is not supported or is very badly scratched so the player cannot determine the format.

I believe it is:

22 Knock sensor Abnormal voltage produced in knock sensor monitor circuit Uses basic fuel map and retards ignition timing (reportedly by 5 degrees)
Code 22

A code 22 will cause a significant loss of engine power. When the knock code is thrown, the ECU retards timing into a safe zone in order to prevent any knocking from happening while the sensor is down. This will causing the engine to bog.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/brandon_f3a03ecb14f80b8d

How to Fix a Code 22 Error

1. Enable the device. Since the most common reason you'll see a Code 22 error in Device Manager is because the device has been manually disabled, try manually enabling it.
   
   Most of the time this will fix a Code 22 issue. Don't worry if it doesn't, however. All that means is that the Code 22 you're seeing was caused by something a bit less common.
   

1. Restart your computer if you haven't already.
   
   There's always the chance that the error Code 22 you're seeing on a device was caused by a temporary problem with the hardware. If so, a restart of your computer might be all you need to fix the Code 22 error.
   
2. Did you install a device or make a change in Device Manager just before the Code 22 error appeared? If so, it's highly likely that the change you made caused the Code 22 error.
   
   Undo the change if you can, restart your PC, and then check again for the Code 22 error.
   
   Depending on the changes you made, some solutions might include:
   
   • Remove or reconfigure the newly installed device.
   • Roll back the driver to a version prior to your update.
   • Use System Restore to undo recent Device Manager related changes.

1. Reinstall the drivers for the device. Uninstalling and then reinstalling the drivers for the device is one possible solution to a Code 22 error.
   
   Important: If a USB device is generating the Code 22 error, uninstall every device under the Universal Serial Bus controllers hardware category in Device Manager as part of the driver reinstall. This includes any USB Mass Storage Device, USB Host Controller, and USB Root Hub.
   
   Note: Correctly reinstalling a driver, as in the instructions linked above, is not the same as simply updating a driver. A full driver reinstall involves completely removing the currently installed driver and then letting Windows install it over again from scratch.
   
2. Update the drivers for the device. It's also possible that installing the latest drivers for the device could correct the Code 22 error.
   
   If updating the drivers does remove the Code 22 error, it means that the stored Windows drivers you reinstalled in the previous step were either damaged or were the wrong drivers.
   
3. Clear CMOS. If Windows had to disable the device, generating the Code 22 error due to a lack of system resources, clearing CMOS might fix the problem.
   
4. Update BIOS. Another possibility is that a newer BIOS version could better pass system resource handling to Windows, correcting the Code 22 error.
   

1. Move the device to a different expansion slot on the motherboard, assuming of course that the piece of hardware with the Code 22 error is an expansion card of some kind.
   
   If the Code 22 error is due to a lack of system resources available for the card, moving it to a different slot on the motherboard could clear up the problem. This isn't as common a situation with newer hardware and Windows versions but it is possible and is an easy troubleshooting step to try.
   
2. Replace the hardware. A problem with the device itself might be the root cause of the Code 22 error, in which case replacing the hardware is the next logical step.
   
   While not likely, another possibility is that the device is incompatible with your version of Windows. You can always check the Windows HCL to be sure.
   
   Note: If you're positive that the hardware is working properly and is properly configured then you might consider a repair install of Windows. If that doesn't work, try a clean install of Windows. I don't recommend doing either before you replace the hardware, but you may have to give them a try if you're out of other options.

Please let me know if you've fixed a Code 22 error in a way I haven't mentioned above. I'd like to keep this page as accurate as possible.

What Does the Code 22 Error Apply to?

The Code 22 error could apply to any hardware device managed by Device Manager.
Any of Microsoft's operating systems could experience a Code 22 Device Manager error including Windows 10, Windows 8, Windows 7, Windows Vista, Windows XP, and more.

Still Having Code 22 Issues in Device Manager?

See Get More Help for information about contacting me on social networks or via email, posting on tech support forums, and more.
Be sure to let me know that the exact error you're receiving is the Code 22 error in Device Manager. Also, please let us know what steps you've already taken to try to fix the problem.
Show Full Article

• How To Disable a Device in Device Manager in Windows XP
• How Do I Enable a Device in Device Manager in Windows?
• How To Disable a Device in Device Manager in Windows 7
• How to Use Device Manager to View the Status of Hardware in Windows

The error E01-22 means polygon motor synchronization error.
The possible causes for the error is problem with ;
- engine pcb
- laser unit
- lvps
- sc pcb
You can try to reseat the connectors, else you may need to replace the board.

Using the Cardio Trainer application for your smartphone, you can map your run, hike, bike, or walk in real-time. This free application uses GPS to map your coordinates and speed, and you can upload this information to your Facebook page by installing the Cardio Trainer Facebook app. The instantly available information, easy tracking, and ability to set time and distance goals means that you can challenge yourself to go further and faster, and share your successes with your friends on Facebook.

Error Code: Grade potentiometer out of range (PO error)
Meaning: error detected in the elevation system you need to recalibrate the elevation potentiometer You can find a qualified technician or send me an email to [email protected] to explain the steps.

No further need for assistance.