Janome 9000. Some of the stick selections on screen do not respond. Why

SOURCE: Janome MC 9000 off touch screen calibration

Thanks guys

I remembered the fix!!

On the Janome MC 9000

To calibrate the touch screen

1. Turn off
2. on Sewing arm above needle there are a series of buttons
3. Hold down bottom 3 buttons
4. While holding turn on machine
5. Using scribe
6. Touch the centre of each + as it appears
7. It will go Centre bottom rh centre top lh as you select each + position it moves of it's own accord.
8. Turn off machine
9 Turn on and test.

Important sometimes this does not entirely fix prob!!
Simply do it again "Yahoo""
Some mechanics will try to tell U the screen is on it's way out
Bollocks just calibrate.
Thanks
CYA

SOURCE: janome 9000 refusing to start

I'll bet it's the fuse. I had the same problem about a year ago.

SOURCE: janome 9000 user's manual. I lost mine when I shifted house

send email to [email protected]

Hassy

• 1388 Answers
• Posted on Apr 21, 2014

SOURCE: I have a Janome mc

This Replacement LCD Touchscreen is suitable for your Janome Memory Craft MC9000

Janome Memory Craft MC9000 Replacement LCD Touchscreen

Janome Memory Craft MC9000 Replacement LCD...

bargainbox.com.au

Buy your Janome Memory Craft MC9000...

Janome Memory Craft MC9000 Replacement LCD...

bargainbox.com.au

Buy your Janome Memory Craft MC9000...