I need to find a nearby shop in the eastern cape, where I will be able to buy a brand new piston for a 43cc trimtech brush cutter, please advise.

SOURCE: Tanaka chainsaw piston probs

The downloadable parts document contains illustrated drawings, part numbers, and descriptions soyou can quickly identify the Tanaka chain saw part you need. To order,go to their dealer locator and contact your nearest dealer.
If your local dealer does not have the part you need, call 1-888-4TANAKA.

THIS site has the full piston set for the ECV4501 model for $31. (You will have to scroll down towards the middle of the page)..You can call them at 1-864-306-2734 or send an email to [email protected]

Should you have any further questions, please post themhere. If you are satisfied with my solution or have no further queries, please take amoment to "Accept" this solution.

Thank you for using Fixya!

Cheers!
IrishDruid

SOURCE: I am looking for Ryobi brush cutter parts

Any local small engine service shop should have these parts in stock. Its called a 'primer bulb'.
Determine if the primer bulb is part of the carb or sperate from the carb with fuel lines connecting them. If seperate remember how the 2 lines get connected when you remove the bulb and replace with a new one. If a part of the carb...
You need to determine if the carb is a Zama or Walbro. It will have the name stamped on the carb. All Zama carbs use the same bulb. Walbro has a small and large bulb.
It would be worth while to install a new carb kit while you have the carb off and apart

SOURCE: Model rlt30ces serial no 0811007404

Thanks found a distributor in Townsville

SOURCE: does any one now were to buy spare parts for my

http://www.outdoorcity.co.uk/product_display_brand.asp?asc123=ProductName&cid=186&cname=Strimmers/
This looks to be from the UK, which country are you from ?

H E MOBILE AUTO

• 178 Answers
• Posted on Jan 06, 2015

SOURCE: how do I find results from Mthethuvumile

SMS 35658 follow details to retrieve information .