It jams all the ecg information up, like the spped is set at 50mm/sec, but the setting is 25mm/sec...
SOURCE: Brother Intellifax 2800 Paper Jam Issues
Thanks for the reply. I will probably recycle the unit, it seems to be bottom barrel quality and not worth any effort.
SOURCE: Paper Jam Photosmart C3180
Normal
0
I suggest you get a sheet of Card Stock (Heavy
paper) and place it in the feed way. Then press the print
button applying a slight amount of pressure on the Card Stock so it
will feed through the printer. The reason for this is in some cases I
have been able to clear the paper track of debris that was deposited there
over time.
Worth a try, as I have fixed a number of printers this
way, saving costly repairs.
Hope this helps.
Bud
SOURCE: the schiller at 2 plus ecg machine not printing ecg
Does it work in auto mode ? are you putting paper correctly means , there is a black mark on paper which is sensed by paper sensor .If you put paper up side down then paper sensor won't be able to sense any paper & gives you error for rifilling paper .If this doesn't help you then You need to replace battrey . Thanks
SOURCE: Samsung clp 300 paper jams after feeding about
Lift Machine up 4 inches at the front with a thick book.
Paper will now run downhill slightly,
Richard
SOURCE: Paper wont feed into printer no paper jam
In the comments section Blumm suggests pushing a piece of cardboard (like the back of a legal pad) through the feeder as far as you can. Turn the printer off and then on again with it in there. Pull the cardboard out and check for any foreign objects that have been pushed through.
It worked for many people including myself - I got a piece of plastic and it works wonderfully again!
448 views
Usually answered in minutes!
×