Question about eMachines Computers & Internet

Open Question

I have an emachines desktop a few years old used only once and was unplugged til tonight . now the screen comes on for about a minute then goes off y is this

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 93 Answers

SOURCE: Screen goes black and power light goes out after a few minutes

it would seem that one of the internal components has failed / overheated Dont open the rear of the monitor !

if pos drop it into your nearest pc repair shop and have is serviced it may just need cleaned to free it from dust build up
on the inner parts this may be causing the unit to over heat

Posted on Nov 04, 2007

Ad

Jose Garcia

  • 453 Answers

SOURCE: SAMSUNG DLP617W SCREEN GOES BLACK SOUND IS ON CAN"T USE REMOTE

u need the main digital board for this model cost about $250 - $350

Posted on May 02, 2008

Anonymous

  • 1 Answer

SOURCE: th-50pz80u turns off for no reason

you can shove your premium assistance program , i spent 2000.00 already
tv shuts off for no reason...red light blinks 4 times ...stops...blinks 4 times....stops....etc....what can i do before taking it back??
this is a brand new unit....fantastic picture....fix my problem

Posted on Dec 14, 2008

fathitkf

Fathi Elmahdi

  • 1871 Answers

SOURCE: emachine running SLOW and Freezes - 1 year old

Here are some suggestions: First of all . Do you have an anti virus installed on your husband's machine ? Viruses can slow the machine and even kill it permanently ( so be careful) . Just install an anti virus and you'll solve the problem . If you are already have an anti virus , then just run a full system scan and watch what will happen and follow the recommended steps that will be given by the anti virus [ There are a lot of anti virus softwares in the market ] but if you suspect that your system is already infected i recommend you to use (Avast professional edition) because it can make a boot scan , that means after you install it , it will ask you if you want to make a boot scan , just agree with it and it will reboot the system and start a boot time scanning , meanwhile you should watch it and give it the right orders if it detected a virus infection . Here is another suggestion : There is a certain software you could install it . This software can help your machine and detect any problem on your husband's computer but viruses . this software is called (TuneUp utilities) . You can download it from here www.tune-up.com . just try it and you'll be satisfied with result . if that didn't help just contact me again and i'll help you as possible as i can .
good luck .

Posted on Jan 29, 2010

tvservice306

tvservice306

  • 458 Answers

SOURCE: My 46

http://esupport.sony.com/US/perl/news-item.pl?news_id=378&template_id=1

Posted on Mar 13, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Power Switch comes on but moniter goes back to sleep.


use external monitor to setup internal monitor setings

Nov 10, 2012 | eMachines T3508 PC Desktop

1 Answer

X40 Screen Went Kinda of Blank


Unplug the set and whatever is connected to it from power for a while and then power them back to see if units will reboot.

Nov 04, 2012 | Sceptre Televison & Video

1 Answer

5 yr old tv goes through cycle and tries to come on, eventually does but after many tries.


My sony did almost the exact same thing. I removed the bulb & cleaned all the dust out of the cooling ducts & the screen on the bulb was full of dust. That bought me about a month, then I replaced the bulb & haven't had a problem since(over a year ago). Just make sure you NEVER touch the glass of the new bulb with your hands,oil on your skin will greatly shorten the bulb life! I found a bulb at a local electronics store for under $200.00... don"t forget to clean dust from cooling ducts,& make sure cooling fan is working, bulb gets extremely hot!

Mar 02, 2012 | Televison & Video

1 Answer

Krunal


Hi Thanks for your question
What i would recommend to do is in order to return your system to working state is to use System Restore tool. To use it please follow this.
1. When starting System press F8 key few times till you are shown some options. 2. One of the options should be Safe Mode please choose it and press enter 3. Once safe mode is loaded you will be asked if you want to use system recovery or just use safe mode 4. Click no to run System Restore 5. Once system restore is started from calendar showed choose the system restore point when system was working correctly 5. Press next and then next again 6. In few minutes your system should restart and work as normal
Good luck an please let us know if this was helpful

May 12, 2010 | eMachines T3406 PC Desktop

3 Answers

My computer wont start up


First try pressing F2 at start up to see if you can get to setup. Also pressing F12 may get you a boot menu. If cd is already set as first boot you may get a chance to boot from a Windows cd. The idea here is to get to a minimal Windows configuration like setup or safe mode (F8) to see if this is a hardware or operating system fault. Two common issues with eMachines are power supply problems where repetitive reboots can actually fry the motherboard or if the PC has a few years use the CMOS battery. Steve Medley

Oct 30, 2008 | E-Machines eMachines Desktop PC

1 Answer

Zenith 27" TV


I sorry to say I think you have a component failing that is related to heat. 15 years is a long time and if the TV was used in hpot conditions over the years it may well be the proble, or it's just old.

Sep 23, 2008 | Zenith C27A24T 27" TV

1 Answer

Emachine 5210


Emachines used to use a poor quality power supply made by Bestec, I believe the quality is supposed to have improved in the last few years but inconsidering the number of dead Emachines that wind up in my workshop I doubt it.
The problem you have is that being a poor quality power supply there is a very high risk that it damaged the motherboard when it went out.
If you can borrow a power supply just to test with all the beter BUT be carefull some Emachines are proprietary and the main motherboard plug is not always wired in the standard way.
Check here for a replacement power supply if you can prove your motherboard to be OK.
http://www.affordablesurplus.com/
Have a look on this site for examples of standard and proprietary power supply wiring colours.
http://pinouts.ru/pin_Power.shtml

Aug 21, 2008 | E-Machines eMachines Desktop PC

2 Answers

Emachine problems


Hi..

Since your computer is working but no display at all. Hope this steps would be helpful in your problem.


1. Turn on your computer, If the problem works again and no display.

2.Turn off your computer by pressing long your power botton until the fan stops properly.

3. Unplug you computer 220volts power chord at the back of your computer.

4. Reconnect again the 220volts power chord after 1 minute.

by. arnold@supportsave.com


Jun 04, 2008 | E-Machines eMachines Desktop PC

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top eMachines Computers & Internet Experts

Thomas F. Schneider

Level 3 Expert

2715 Answers

Ekse

Level 3 Expert

13434 Answers

Cindy Wells

Level 3 Expert

6069 Answers

Are you an eMachines Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...