Daewoo Dryer Model CWR-WE10WW/RR Troubleshooting code "LE" how can I self fix?

According to the service manual,

Daewoo Washing Machine Error Fault Code = LE
Fault Detected: Washing Machine Door Open
Washer Has Detected: Washing machine detected door as open or not locked
Check / Repair / Fix = Close door – Door lock switch – Door latch – PCB

this is the code issue for the Daewoo washers things to check The washing machine or washer dryer door has been detected as open or unlocked.

• Close the door!
• Check the door lock switch
• Check the door latch
• Check PCB

The washing machine or washer dryer door has been detected as open or unlocked.

• Close the door!
• Check the door lock switch
• Check the door latch
• Check PCB

LE Washing machine door opening error
The washing machine or washer dryer door has been detected as open or unlocked.
·Close the door!
·Check the door lock switch
·Check the door latch
·Check PCB

-Most dryer's thermal fuse are locate on the back (Inside).
-Disconnect main power before remove the back panel cover off.
-Usually there are 3 thermals. (2 at heater element, 1 at exhausted
vent)


Good Luck


Mai

my daewoo washing machine has error code LE
after every wash , it cannot rinse and spin then show
beep sound and show code LE. Thank you

replace the lock switch

In other Daewoo models LE error code means pressure sensor failure. This sensor is used to know water level in the tube. It is probable that your model reports the same codes.
It does not necessary means a broken sensor you must check the electrical connectors and cables as well as all the mechanic and pneumatic elements like the hose connected to the sensor.
It is often clogs with soap and other particles.

Good Luck!