Panasonic TC-58AX800U ----- unit turns on, panasonic splash screen appears, click sound is heard, screen goes black, LED flashes/blinks 6x /// this is an LED type of tv, not plasma - i have learned that LED and plasma tvs have different blink codes and different components inside - i need to identify the defective component and replace it
SOURCE: Monitor goes black and both blue lamp blinks
have a tech check your tv there is a fault in tv horizontal circuit.good luck my friend.
SOURCE: Panasonic plasma 50PZ85 power led blink 10 times
Either a bad power supply or a bad processor board.
A Good Service Shop should know what the 10 blinks are indicating.
May be a repair cost between $200 and 400 dollars.
Be prepared -
Blessings,
A/V Media Guy
SOURCE: I have a panasonic CT-34WX54J and The Power LED
sounds like the horizontal deflection circuit is not running. this circuit powers the rest of the set. this will require advanced troubleshooting
SOURCE: Need solution for Panasonic Plasma TV TC-50PX14
Hello,
Your TV 7 blinks indicates you have a faulty ss board its bad or needs service
SS Board (SS Data Energy recovery and data driver). So check ss board for faulty components.
i think it helps
Thank you for using fixya
Chandrashekhar Bhat
SOURCE: Panasonic viera Plasma TV model TH-P42X10A The tv
Hello,
The power supply board of the television is dead, u know basic electronics' and soldering? Most of the times, the power supply board just have dead leakages gases capacitors.These capacitors always bulges up on it top,or puff up on it top.Replaced these gases leakages capacitors will get your TV power stable,and work again.Or tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board for the replacement.
I hope this will help in solving the problem....
417 views
Usually answered in minutes!
×