At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
I was given a Durabrand TV awhile back and it didn't come with a remote control. Just lately I hooked it up to my cable. I realized that my cable wouldn't work with the TV, simply because it is stuck on AUX mode. Can I get out of AUX mode without a remote? I finally couldn't figure it out, so I bought a universal remote from RCA that should be compatible, but I have not been able to program it. Even with the device codes, nothing has worked for me. Hopefully someone out there knows.
Thanks
You can program a Comcast remote to work with the TV. Press the "TV" button on the Comcast remote. Then, hold down the "Setup" button until the red light blinks 3 times. Enter a 5 digit code: These are the Durabrand codes: 10171 10463 10180 10178 11034 The 10171 code worked for my Durabrand DWT1905. Then use the TV/VCR button located beneath the "7" to switch inputs.
You can buy an original remote or a known usable substitute here:
Durabrand remote
If the RCA 'universal' (no such thing) remote code listing has any of the following brands listed, you should try these first since they are all made by Funai:
Funai, Symphonic, Sylvania, Emerson, Aventura, ESA, Magnavox, INSIGNIA, and Misakai
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Here are the codes for your GE TV: 645, 742, 763, 531, 676, or 690.I have provided the instructions to program the DISH remote to your GE TV:AddressRemote to TV
While at the device location (TV, etc), point the remote at the device. Press and hold the device button on the remote (TV, Aux, etc). - All four mode buttons should light up
Enter the three-digit remote control code - The mode button (TV, Aux, etc.)you selected should light up
Ifyou are programming a code into AUX Mode, you must do the following beforeentering the device code:Press 0 for a TV (if TV code is 500, enter 0500)Press 1 for a VCR/DVD (if DVD code is 617,enter 1617) Press 2 for any other device (if device codeis 639, enter 2639)
Press the Pound (#) button - The mode button you are programming should flash three times
Press the large, red POWER button - The device should turn off
Here are the codes for a Toshiba TV and DISH remote: 617,631, or 744AddressRemote to TV
While at the device location (TV, etc), point the remote at the device. Press and hold the device button on the remote (TV, Aux, etc). - All four mode buttons should light up
Enter the three-digit remote control code - The mode button (TV, Aux, etc.)you selected should light up
Press the Pound (#) button - The mode button you are programming should flash three times
Press the large, red POWER button - The device should turn off
These are the codes for the Sanyo TV: 590, 683, 090, 589, 789, or 591. I have also provided the instructions on how to program the DISH remote to your TV.
AddressRemote to TV
While at the device location (TV, etc), point the remote at the device. Press and hold the device button on the remote (TV, Aux, etc). - All four mode buttons should light up
Enter the three-digit remote control code - The mode button (TV, Aux, etc.)you selected should light up
Press the Pound (#) button - The mode button you are programming should flash three times
Press the large, red POWER button - The device should turn off
Please let me know if you have further questions. Thanks.
Here are the codes for the Samsung TV: 738, 680, 833, 516, 666, 679, or 664.
I have also provided the instructions on how to program your DISH remote to your TV.
AddressRemote to TV
While at the device location (TV, etc), point the remote at the device. Press and hold the device button on the remote (TV, Aux, etc). - All four mode buttons should light up
Enter the three-digit remote control code - The mode button (TV, Aux, etc.)you selected should light up
Press the Pound (#) button - The mode button you are programming should flash three times
Press the large, red POWER button - The device should turn off
If you have further questions, please let me know. Thanks.
Hi, my name is Cheri Torres with DISH Network CustomerService. We do have a few codes that you can try in order to get your DISHremote to control your Durabrand TV functions. I will list here for youour best codes for our most popular remotes and also the instructions foraddressing your remote to your TV. You will be able to find the model number ofyour remote on the back of the remote at the top. For the 3.0, 3.1, 3.2 and 3.4IR remotes the best codes for Durabrand TVs are 220 and 233. For the 5.0, 5.2,5.3, 5.4 and 20.0 IR remotes the codes are 220, 221and 523. For the 4.0, 4.4,6.0, 6.2, 6.3, 6.4 and 21.0 IR/UHF remotes the best codes are 233, 220 and 720.I hope you find these codes and instructions useful and if you have any furtherquestions or concerns feel free to email me at [email protected]. :)
Instructions for addressing remote to TV
Turn the Television On.
Press and Hold the TV Mode button until all the other mode lights (i.e. AUX, SAT etc.) light up.
Enter the three-digit code using the buttons on the number pad.
Press the pound(#) button. Note: The LED will flash three times.
Test functionality with the TV
Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.
This process should be used if the code for the device is not listed in the Manufacturer Code List.
Turn on the device you wish to program.
Point the remote control at the device.
Press and hold the Mode key (TV, DVD or AUX) you want to program. Without releasing the selected Mode key, press and hold the OK key simultaneously
Release both the Mode key and the OK key at the same time. All the Mode keys will flash twice indicating programming mode.
Enter code 922 by pressing the number keys on the remote control. The selected Mode key will flash twice indicating correct entry. Note: This next step is For AUX Searching only, press and release the PLAY key then press:
1 for VCR
2 for Receiver/Tuner
3 for Amplifier
4 for Home Theater In The Box (HTIB)
All the Mode keys will flash twice indicating correct entry.
For AUX only, press and hold the PLAY key and wait until the device turns off, then release the PLAY key.
The REW key can be utilized to go back through the codes one at a time.
The FF key can be utilized to move forward through to codes one at a time.
Press the PLAY key to resume auto search of device codes.
To save the code, press the ENTER key on the remote control (bottom right) or press the EXIT key to return to normal operation. The selected Mode key will flash three times and return to normal operation.
If no valid code is found, the red light will flash two times and the remote control will return to normal operation.
Turn the device back on using the remote control. If this doesn’t work start over or try Manual
Press the appropriate Mode key on the remote control to work with the selected device. To use the remote control for the AT&T U-verse TV Receiver, press the AT&T Mode key.
You will need the original remote control I,m afraid. The original remote is the Durabrand HYF-23A. On the original remote, incase you do have one, is a button marked TV/AV. That is the button that changes between the TV and the Audio/video inputs. An original replacement remote can be purchaed HERE:
http://www.remotes.com/remotes/servlet/rs?a=gmi&smodel=BH1304D&brand_pn=DURABRAND_BH1304D&mode=large&uid=11831222740150
Good Luck
×