Does the watch count steps on a stationary bike? Doesn't seem to

SOURCE: Fossil watch

I have a Fossil Kaleido that i havent used in some time. I just replaced the batteries in it and the only thing that works is it goes from solid red to hearts..it wont keep time. I only have 2 buttons on the side..one to change the time and one to set to either red or switch back and forth/// PLEASE HELP!! i love this watch

SOURCE: Fossil JR9589

(I'm dutch, so I'll try in my best englisch)

I don't know if you still have the problem, but what you should do is te following:

* pull out the knob (2 times) and turn anti-clockwise to change the time
* keep doing until it's 24.00 (midnight) and you day change's to the UK (!) day.
* push back the knob (1 time) and change the day to the FRANCE (!) day by turning anti-clockwise
* pull out the knob again and turn anti-clockwise to change the time until 03:00 (midnight)
* you see the then change the day back to the UK day

So, every night at 00:00 the day changes to the FRANCE notation and at 03:00 it then changes to the UK notation, so you can enjoy this setting during the day.

Good Luck.
Also owner of JR9589 watch.

SOURCE: Question:how to set the weekday on a Fossil watch model BQ-9165.

You have to pull out the stem all the way and turn clockwise until you get to the correct day. Hopefully you won't have to wind thru the whole week.

Arturs Kalnins

• 2338 Answers
• Posted on Mar 24, 2009

SOURCE: how to change the time on fossil watch, put the time one hour fwd

Follow this link and download proper instructions:

http://www.fossil.com/webapp/wcs/stores/servlet/StaticView?langId=-1&storeId=12052&catalogId=10052&page=Instructions&nav=custCareNav

Rate me, please.

SOURCE: Set time on Fossil DQ1138 Watch

Press and hold the SET button (it will read CHIME with a flashing on or off). Then push the MODE button - the top will be flashing 12-HR or 24-HR. Push the ST/SP button to toggle between the 12-HR to 24-HR reading. Push the MODE button to get to the hour/minute/second/year/mo-day/month/day value you want to change. Push the ST/SP button to increase the value, the RESET button to reduce the value.