Error code 1h on kenmore he plus2 - Kenmore Washing Machines

that's not an error code. it's a 1H, as in one hour, the delayed start function. hold the delay start button down to override, then reset it back to where you want it.

Good Afternoon friend, thanks for your post!

I see you are having trouble with your Frigidaire refrigerator and you are receiving error code "1H". However, it appears "1H" is an invalid error code. I would suggest a reset of your appliance and you can do that by unplugging the power cord or flipping the household circuit breaker to the off position for roughly ten minutes. This usually clears false error codes.

If resetting the power does not correct the issue, could you please inform me of the new error code or if your refrigerator continues to display "1H". I look forward to assisting you. -Matt

1H isn't an error on this unit, it means that the washer was set for a 1 hour delay for this cycle.

Admin

Error Code = 467
Explanation and Checking points = Inverter compressor rotation error. Interchange any 2 phase.

hi heres what i found The 1 H is not a fault code it is the delay time of one hour.

you have set it to start after a one hour delay- just press the start delay button until it cycles through past 24h and you will get back to the immediate start mode...

The 1 H is not a fault code it is the delay time of one hour.

You need to rebuild the database. You can do that using iriver Plus3 which is out now. I am not sure about Plus2. Look for rebuild database function in your software.