@jamesdoug70
jamesdoug70
hello sir
i think you are the only person whom i looking for>>>
i have the same issue in my LG 50 3D tv
i have changed the bast light LED strips, and i am looking for reset the blinking light.
i there another way to enter the service menu,
i am tried looking in the internet for that.
my tv model : 50LA6230
thanks a lot in advance .
Https://www.lg.com/us/support-product/lg-55LB6100
SOURCE: TOSHIBA MODEL MV13M2 NO MANUAL, NO FACTORY REMOTE
HI
Yes you can set the menu function if have menu button is there!
Thanks!
SOURCE: WHERE CAN I DOWNLOAD USER MANAUL FOR LG 32 TV
you can get it right from LG and they are free in pdf format
SOURCE: can the service menu for the LG 52sz8d dlp tv be
Hi there,
One possible solution to access the service menu on LG tv's is as follows with steps 1 - 4:
1. With the TV on, press and hold the MENU button on the TV front panel.
2. While holding that button, press and hold the MENU button on your remote.
3. Hold both buttons for ~5 seconds until the service menu comes up on the TV.
4. Release the remote MENU button first, then the TV MENU button.
If you are looking to reset the lamp indicator then continue with the following steps 5 - 11:
5. Press and hold the ENTER (or OK) button on the TV front panel.
6. While holding that button, press and hold the MUTE button on the remote.
7. Hold both buttons until the Lamp Life Hours show up on your TV screen.
8. Release the MUTE button first, then the ENTER button on the TV front panel.
9. Make a note of the lamp hours if you want.
10. To reset the lamp hours, press the SELECT button (the one between the four arrow keys with two concentric circles on it) on your remote.
11. It will ask you to confirm the reset--press SELECT again to confirm.
To verify you've reset the hours, you can repeat steps 1-9 above and then just press the EXIT button on your remote.
Hope this helps. Regards, James.
SOURCE: TV service menu
your tv service mode press tv manual (ok) button and remotes (ok) button at the same time. you wants to press both the buttons at same for fue seconds then service mode open
3,970 views
Usually answered in minutes!
×