Https://www.manualslib.com/manual/995443/Janome-Memory-Craft-7000.html Janome Memory Craft 7000 Instruction Book
Don't you have a manual? If not, try unplugging and waiting 10 seconds and plug it in again. There is also a clear button. I saw a great demonstration of this machine on www.youtube.com, looks like a very nice machine.
SOURCE: where to obtain new screw for embroidery hoop
you need to contact Janome here
http://www.janome.co.uk/contact.php
SOURCE: jANOME MEMORYCRAFT 8000 STEPPING MOTOR
if you ever have this problem, it is because you have had something in the way of the embroidery arm at the back of the machine, so it has not been able to move freely; you'll get a terrible noise as the machine is unable to do what it wants, slips gears or something and then can't bring the arm to its home position. But fear not, i have found if you turn the machine off and gently push the arm back home to touch the machine as it is the start position, when you turn it on, it will work fine and no harm done. just make sure the arm can move freely before you start embroidery!
SOURCE: I have a Janome Memorycraft 7000 machine. The
This could be a symptom of a backlight issue for the LCD screen. The entire screen may need to be replaced. If your sewing machine is under warranty, take it to the shop or contact the company. For contact info see: http://www.janome.co.jp/e/e_links/america.html . I do not see a MemoryCraft 7000 listed on their site. The 9000 is listed as a retired model which came with a 20 year warranty (except for the electrical/electronics which have a 2 year warranty).
Unfortunately, Janome doesn't sell repair parts to non-dealers to the best of my knowledge.
I wish that I had better news.
Cindy Wells
235 views
Usually answered in minutes!
×