The internal memory is very small, so that is normal. Make sure the switch on the card is set to unlocked. Also, if the card is over 2GB, it is not compatible with this model, you'll have to try another one. Make sure the card is inserted correctly and that it clicks into place. Verify on the camera screen by checking for a picture of a memory card just under the battery icon. If it says IN, the camera is not reading the card.
If nothing else works, backup your photos and format the card. This will erase all data on the card. You can format the card from the setup menu. (Menu > Setup [Wrench icon] > Format > Yes) Make sure not to use the card with other devices at the same time, it may leave data on the card that the camera cannot read properly.
If none of this helps, see if the camera works without any card. If it does, then the card may be defective, try another one (noting above size limitations).
144 views
Usually answered in minutes!
have you tried formating the card from the computer?
×