Washing Machines Logo

Related Topics:

Posted on Jul 31, 2009
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

I have a roper washer model #rab5232ew1 first how old is it?? the problem is when it start the cycle the tub fills up with water and it starts turning and washing the clothes and half way thru the washing phrase it just stops and nothing has been touch, also it is not over filled with clothes seems to me the timing cycle dial is shot to empty the tub i have to un plug the washer and play with the dial with the different settings to rinse and then spin my question is what is the cost of the dial thanks

2 Answers

thompsonfix

Level 1:

An expert who has achieved level 1.

MVP:

An expert that got 5 achievements.

Night Owl:

An expert who has answered 10 or more questions between 12 midnight and 6am on the same day.

Hot-Shot:

An expert who has answered 20 questions.

  • Contributor 37 Answers
  • Posted on Jul 31, 2009
thompsonfix
Contributor
Level 1:

An expert who has achieved level 1.

MVP:

An expert that got 5 achievements.

Night Owl:

An expert who has answered 10 or more questions between 12 midnight and 6am on the same day.

Hot-Shot:

An expert who has answered 20 questions.

Joined: Jul 31, 2009
Answers
37
Questions
0
Helped
10759
Points
98

The part you refer to is called the timer - find it here www.repairclinic.com

Bruce Bracey

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Master 1,000 Answers
  • Posted on Jul 31, 2009
Bruce Bracey
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Feb 08, 2009
Answers
1000
Questions
1
Helped
622793
Points
3633

The timer does appear to be available,
Timer
Part Number: AP3019192 made by WHIRLPOOL
COST: $102.52

I could not find any info that would indicate the age of the washer.
Regards,

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

My Roper heavy duty 8 cycle 2 speed combination washer does not fill up on rinse cycle

when in rinse washers use just cold water so clothes don't wrinkle,try this,set the washer to just cold,start it and see if it fills or fills slowly if so you have a bad water valve on washer or no cold water going to washer.
0helpful
1answer

Roper washer new will not fill with warm water on rinse cycle it fills and spins

if its only a new machine make sure transport bolts have been removed
0helpful
1answer

My Roper washer will only work on the spin cycle. It will not fill or work on any other setting. The fill hoses are clear of debris and there is no kink in the drain hose. What do I check next?

The indication you state is consistant with the washer sensing water in the tub. If there is no water in the tub, then it would be the tub sensor. If there is water in the tub, and the spin cycle doesn't get it out, then I would look at the pump or the control board.
0helpful
1answer

I have a GE toploader washer. The model # is WBSR1060T (VVSRV1040V, & YVSR1040V were also on the washer too) the washer keeps filling to the max setting no mater what the water level is set on, also...

Remove the front panel of the washer by using a putty knife to release the retaining clips, located in the seam between the front panel and the washer's top, about 2 inches in from each side. With an empty wash tub, remove the small hose on the left side of the outer tub and clean out the inside of the hose. Replace the hose. Test.
0helpful
1answer

The washer's springs configuration

They are hooked from the bottom frame to the carriage that holds the tub. Not sure of the model you have but most Whirlpool (They make kenmore, roper, magic chef and others) There is a ring around the top of the outer tub that is filled with water from the factory. Make sure it still has water inside. It acts as a damper helping to balanced the tub also.
2helpful
2answers

Water runs contiuously... tub never fills...cycle doesn't start.

Hi, You need to reset the drain hose. It needs to be over the water level in the machine. If you have it in a sump pump, it needs to be out of the water in the sump. If I can help you further, please let me know

Thanks
Vic
0helpful
2answers

Washer won't stop filling

if you can turn the washer off while it is still filling. and the water continues to enter the machine you have a bad inlet valve.
Do me a favor turn the washer to fill, with the washer still running unplug from the wall. If the water is still entering the unit you have a bad inlet valve
0helpful
1answer

Washing machine does not stop filling

Does the machine start working normally after turning the wash cycle manually ?
Not finding what you are looking for?

248 views

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29494 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...