LSR7200EQO whirlpool will not spin out or drain

https://producthelp.whirlpool.com/Troubleshooting_Guides/Troubleshooting_for_Top_Load_HE_Washers_(Electronic_Control)/Error_Codes/F%23_E%23_or_F%23%23/F9_E1_Error_code_for_top_load_washers

Check pump. Won't spin until it drains.

Washer Repair - Not draining or spinning ... - YouTube

? 5:17
www.youtube.com/watch?v=k41abYwM9WY
Jul 12, 2013 - Uploaded by ApplianceVideo.com ... your Whirlpool Washer which has this following issues: Notdraining or ... Whirlpool & Kenmore Washer Won't Spin or Drain, Just Hums ...

it appears you have a timer or faulty pc control board causing your prob

check your drain pipes from tub to exit point
check brushes
does the machine sound loud when in spin if yes change your bearings

Does the washer spin on rinse and drain cycles ok? If it does spin but won't drain, the problem is the plasic impeller in your drain pump. This model is a direct drive unit with a reversing motor that runs one direction for agitate, but reverses to spin the tub and operate the drain pump. So if it spins but DOES NOT drain, it's the drain pump, but if it doesn't spin or drain, than it's probably a lid switch. Also the tub to pump hose or pump discharge hoses may be clogged with something. If your mechanically apt, you can do this repair yourself and save a service charge. The pump runs about 30 dollars or so and is really easy to change out. Check out Youtube videos on Whirlpool washer repairs, they will show you everything to do. Yes, I said Whirlpool, because Roper is built by Whirlpool.

Hope this helps

kcomp1863

My whirlpool heavy duty 2 speed 7 cycle washer machine stopped working, It fills up and aggitates for the first cycle then when it should drain and spin it doesnt drain nor spin

99% probability that your timer switch is done. The only remedy is replacement.

check you lid switch

check your lid switch. if it will aggitate and not spin or drain.. then your lid switch is your answer