Trying to program my Directv (tivo) remote to new Proscan 32" tv. The codes from directv don't work. Any suggestions?

To whom it may concern,
My suggestion is to call DirecTv customer support and request they walk you through the programming process. This is not a difficult process for them to help with. If this does not work, don't be afraid to schedule a technician visit.

Best wishes,
Dish Guy

If you need further help, I’m available over the phone at https://www.6ya.com/expert/brian_142c5ec89a7a3fda

Proscan is RCA like Technics is Panasonic. Are you trying to program a directv remote? go to

Remote Control Code Lookup

Follow the directions, it's super easy.
Please mark my answer as helpful.

you can key in your units and get the most likely codes at
http://www.directv.com/DTVAPP/global/contentPageIF.jsp?assetId=P4380036#h:620.480

Don't know if the 26" is the same as the 32, but 10019 works for the 32".

tivo button is the Directv button (tivo home) at the top of the remote. if u have the new directv remote, the tivo home button is the menu button. remote needs to be on satellite. to program codes.

If it were a Tivo series 3 you might have better luck with it.

http://www.tivo.com/setupandsupport/technicalsupport/compatibilityhelp/Using_the_Learning_Feature_of_the_TiVo_Glo_or_Series3_Remote.html

I've had my series 2 Tivo for about 2 1/2 years and never found the correct codes for it. I think it works off of a list of TVs manufactures about 3 years ago.

Emerson codes: 10154, 10236, 10463, 10180, 1o178, 10171, 10019, 10177, 10623, 10179

Protron 32", new Directv R66 receiver/remote. Code is 10030. Works

Try this: On the Tivo remote press and hold the TV Power button and the Directv/TIVO button at the same time. Hold both buttons down for about 4 seconds or until remote light stays red. Then press the channel up button until the tv turns off. You may press the button over 100 times. You need to go slow. When the TV turns off press the enter button (or select button).