Question about Whirlpool Washing Machines
If washer not spining are draining u might have a clog pump are pump need replaceing are u might have a problem with your motor control broad need replaceing are it might just be a lose connect on the motor control broad all these problem ca be solve by google it an they show u a video on how to fix are replace the part are just call a techican to repair your machine
Posted on May 17, 2018
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
It sounds like you have a broken motor coupling. This is a very inexpensive and simple repair.
If the washer will fill and drain, but won't agitate or spin, you may have a broken motor coupling. The noise of the motor engaging, lack of agitation and ability to still drain are the usual symptoms. This is a common fail item with this model washer through normal wear and tear. Newer versions of the coupler are more resilient and resist breaking. The following link explains how to replace one:
The motor coupling is located between the drive motor and the transmission and takes the place of a drive belt. They do wear out and can break. The replacement part number is included in the link I provided and is an improved upgraded coupling that is more resilient. It should last longer. If you have questions, or require additional assistance, please let me know. I hope this helps you.
A replacement coupler can be purchased on line at appliancepartspros.com for about $11. Just use the part number in the link and "Search by Part Number" for your search criteria.
Posted on Jul 23, 2009
First check the hoses to the machine. If they leak the water follows the hoses and drips on floor. Also check the hose connection at the washer. They will leak inside. Next it may well be a water pump going out or the plastic hose that is under pressure when operating. The pump is in the middle of machine underneth - Sorry - Good luck
Posted on Oct 16, 2009
The motor coupler may be broken. Many Whirlpool®-manufactured washers use a small, relatively inexpensive motor coupling. It's plastic and rubber and is mounted to the shaft of the motor on one side, and to the transmission on the other. Over time, the coupler wears out and fails. You may need to replace it.
Posted on Mar 21, 2011
Tips for a great answer:
Sep 14, 2017 | Whirlpool Washing Machines
Jul 22, 2011 | Whirlpool Ultimate Care II LSQ9549L Top...
Mar 21, 2011 | Whirlpool Ultimate Care II LSQ9549L Top...
Feb 12, 2010 | Whirlpool Ultimate Care II LSQ9564J Top...
Jan 03, 2010 | Whirlpool Ultimate Care II LSQ9549L Top...
Jul 23, 2009 | Whirlpool Ultimate Care II LSQ9564J Top...
Jan 12, 2009 | Whirlpool Ultimate Care II LSQ9549L Top...
Nov 30, 2008 | Whirlpool Ultimate Care II LSQ9549L Top...
42 people viewed this question
Usually answered in minutes!