My MP530 willnot print black printed text. How do I now if the ink head is plugged and what do I do about it?

Hi ...

I would suggest you try and clean the print head and that should resolve the problem. Follow the below steps to clean the print head:

Perform a Cleaning of the print head:
Caution: Cleaning consumes a certain amount of ink. Perform Cleaning only when necessary.
Note: The pattern varies depending on the printer and version of Windows being used.

1. Click 'Cleaning' to perform print head cleaning from the Pattern Check window and proceed to step 3 of the print head cleaning instructions. If the Pattern Check window is closed, skip this step and proceed to step 2.
   
   
   
   
   
2. To perform a print head cleaning from the Maintenance window, click 'Cleaning'.
   
   
   
   
3. When the Print Head Cleaning window is displayed, select the target ink group for 'Cleaning'.
   
   
   Note: When performing Cleaning for all colors, check 'My MP530 willnot print black printed text. How do - mp_500_ph_cleaning_all_colors.jpgbr />
   
   
   Note: When performing
   
   
   Cleaning for Color only, deselect 'All Colors', and check 'Color'.
   
   
   
   
4. After selecting the target ink group click 'Execute' to perform the cleaning of the print head nozzles.
   
   
   
   
5. When the confirming message is displayed, check the contents, and click 'OK'.
   
   
   Caution: Although the Nozzle Check window is displayed, do not perform any other operations until Cleaning is completed.. Cleaning will take about 40 seconds.
   
   
   
6. Print a Nozzle Check Pattern and examine.
   
   
7. Perform Cleaning again if necessary.
   
   
   Memo: If the pattern is still abnormal after two Cleanings, perform up to two Deep Cleanings.
   
   
   

1. In the Maintenance window, click 'Deep Cleaning'.
   
   Deep Cleaning.
   
   
   
   
   Note: When performing Cleaning for Black onlyMy MP530 willnot print black printed text. How do - mp_500_dph_cleaning_execute.jpgck 'Black'.
   
   
   
   
   Note: When performing Cleaning for Color only, deselect 'All Colors', and check 'Color'.
   
   
   
   
2. Click 'Execute'.
   
   
   
   Memo: By clicking 'Initial Check Items' before clicking 'Print Check Pattern', you can see the specific confirmation items in Nozzle Check.
   
   
3. When the confirming message is displayed, click 'OK'. (The Power lamp will blink green and Deep Cleaning starts. The blink stops when Deep Cleaning is over.)
   
   
4. When Deep Cleaning starts, check the contents, and click 'OK'.
   
   
   Caution: To prevent interruption of the Deep Cleaning process, do not perform any other operations until Deep Cleaning is completed. When the operation of the printer is stopped, Deep Cleaning is completed. Deep Cleaning will take about 75 seconds.
   
   
   
5. Print Nozzle Check again.
   
   
   Note: If the printed pattern is still not normal, perform steps 1 through 4 of the Deep Cleaning process one additional time.
   
   
   Caution: If after two Deep Cleanings the Nozzle Check Pattern is still not normal, turn the printer off and let it sit for 24 hours or more before attempting another Deep Cleaning again. The wait time may allow dried ink in clogged print head nozzles to liquefy, and resolve the problem