Question about Frigidaire Washing Machines

Open Question

Can the cycle thermostat on a frigidaire fex831fs4 be changed from the front

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need help replacing the thermal limiter in my stacked Frigidaire FEX831FS4. I know where it is, but I don't know how to get to it. Cherish


Go to www.repairclinic.com and enter FEX831FS4. You will be presented with a list of common repair parts and may be able to view a video showing disassembly and location of the thermal limiter.

Oct 18, 2016 | Frigidaire Dryers

1 Answer

Frigidaire AC window unit, model fam185r2a (18,500 BTU) only cools for a few minutes before it cycles off and just fan blows. Then a few min later cool air cycles back on. Is this a thermostat issue?


The window units normally have a sensor thats attached to the front of the indoor coil. This controls the thermostat. I usually pull this sensor away from the coil because it stops cooling before the room is cool. It is attached to the cold coil so it senses the coil temp, not the room temp. You can normally see it when you remove the air filter. Don't break it! It may be a wire or small copper tube

Jun 10, 2015 | Frigidaire Heating & Cooling

1 Answer

My frigidare laundry center, FFLE2022MW will not fill with water at all.


I have a Frigidaire Landry center model # FEX831FS4 I washed a small but heavey rug in it and it quit during the spin cycle and now wont do nothing but the dryer still works...can you help me out?

Aug 21, 2014 | Frigidaire FFLE2022MW Electric Laundry...

1 Answer

HOW DO I CHANGE THE HEATING ELEMENT IN MY FRIGIDAIRE LAUNDRY CENTER FEX831FS4


Good afternoon Jerry, thank you for your post!

I understand that you are attempting to change the heating element inside your Frigidaire laundry center, FEX831FS4. These intricate parts do require precision and patience, therefore when replacing the exchange of electrical components or removing them from your appliance, I always suggest seeking professional assistance. One must be very careful as these replacements can lead to potential harm. -Matt

Aug 19, 2014 | Frigidaire Washing Machines

1 Answer

I have a FEX831FS4 washer/dryer. The washing machine will wash and spin, but will not rinse and spin. Lid is locked.


think ur voltage is too low..usually frigidaire brand washer is 220v,..usually starting of spinning has a high ampere and it need a high volt electrical supply..try to check ur main breaker for washer only..ur lid lock will lock after 10secs when it spin fast...

Dec 02, 2012 | Washing Machines

1 Answer

Getting beeping sound from door lock switch unit stops running on a fex831fs4


Hello acedel72 - Try resetting the unit by unplugging it or flipping the household circuit breaker off. Wait approximately ten minutes and if it proves to be ineffective contact a professional to move forward accurately. Unit could possibly be experiencing a communication issue with the control panel, faulty door lock switch or wiring failure which would need further diagnosing.

Nov 21, 2012 | Frigidaire ATF6000ES Front Load Washer

3 Answers

Frigidaire model fex831fs4 will not drain or spin


My problem was a little different but I want to post this for others that might experience the same.

My Frigidaire Washer/Dryer Stack Combo Model FEX831FS4 was not draining and had a humming/buzzing noise when it got to drain/rinse cycle. This is usually and probably caused by a small sock or thin or small underwear that got sucked out the top and into the drain hose. I have no idea why they did not design this with a rubber flap like most washers to protect from items going up and out but here's how you fix it.

IF your unit is having this issue STOP and don't try runnin drain/rinse cylces anymore or you may damage the water pump and have to buy a new one. I think I damaged mine from trying to drain the water so many times with a sock clogged in there... but so far it is working anyway, just with a buzzing noise.

HERES THE FIX

You need to TAKE OFF the FRONT COVER and REMOVE the ITEMS FROM the HOSE leading to the WATER PUMP. The water pump is on the bottom front left and theres only TWO SCREWS to get off the FRONT COVER of the washer/dryer. They are on the bottom by the feet. Have someone tilt the unit backwards and unscrew them with a phillips head and then pull the front cover down and off. There is a rubber snap pin in the top center of the cover but it will come loose as you pull down.

In order to get at the water pump you do NOT need to pull the washer/dryer out, you can get at everything from the front. However it might be a wise decision to unplug the power since water will be draining everywhere.

First siphon out all the water in the tub, whatever you don't siphon will immediately coming rushing out once you remove the hose from the water pump.


I would UNPLUG the electrical connector on that water pump and tie it up out of the way because even if you siphoned the water there will still be water in the hoses and probably under the washer tub some.

Disconnect the hose that comes from the tub to the water pump. That's where I found a small children's sock clogging the pump. Dry off the water pump plug connector pins if they got wet (where you removed the plug from) and reconnect the electric connector.

We tried many times to run the drain cycle before taking the washer/dryer apart so your water pump might be shot as I think mine is. Now mine always makes a buzzing noise as if it's wore out from being worked with a sock blocking it's inner part. You might need to replace your water pump.

May 08, 2012 | Frigidaire FEX831F Top Load Stacked Washer...

2 Answers

Frigidaire dishwasher won't end cycle - will run on and on for hours. Sometimes it cycles through, usually it just endlessly washes and rinses. I have to CANCEL the cycle, which causes the dishwasher to...


I would say the resettable thermostat has failed. There is a thermostat which senses the water temperature, and when it fails, it causes the dishwasher to run constant. Replace the thermostat underneath the dishwasher and that should cure problem. Part number is 154290204 (I know the number off by heart, that's how often it happens!)

Apr 07, 2010 | Frigidaire 24 in. FDBB540 Built-in...

1 Answer

Dryer shuts off, no heat, AD code


During normal operation, the display may show: “ad” - dryer is in an auto dry cycle. “dn” - cycle is done in auto dry. “PF” - a power failure to the board has occurred. “Err” - an error has been detected. “LOC” - control lock is activated. “PAU” - cycle has been interrupted.

Jun 18, 2009 | Frigidaire Affinity ATF7000ES Front Load...

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Jason Harris
Jason Harris

Level 2 Expert

274 Answers

Marvin
Marvin

Level 3 Expert

85223 Answers

Are you a Frigidaire Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...