I wud like to know how to enable apn on mobicel v1

If you can't turn on data on your Mobicel Rebel, check your phone's settings, make sure mobile data is enabled, and confirm that you have a data plan or sufficient balance with your mobile carrier. If the issue persists, contact your carrier for assistance.

I have data connection problem with my phone Mobicel v1

On the main screen of the Galaxy S5, select Settings.
You should now be able to see Mobile Data - Access Point Names, hit there
Once you are in the APN, please delete any existing APN you have listed there, after that, please create a New APN

• APN: wholesale
• APN type: default,mm,supl
• Proxy: not set
• Port: not set
• Username: not set
• Password: not set
• Server: not set
• MMSC: http://wholesale.mmsmvno.com/mms/wapenc
• MMS Proxy: not set
• MMC: 310
• MNC: 260
• Authentication type: not set
• APN Protocol: IPv4
• APN roaming protocol: IPv4
• APN enable/disable: APN enabled
• Bearer: unspecified
• MVNO type: none
• MVNO value: not set

After you have corrected punched in the correct APN Settings, you need to SAVE it,
Reboot your phone and test it, SOURCE: I have a zte z832 unlocked cricket phone and I put my life wireless SIM card from the lifeline free phones in the phone and need to set the APN ..does anyone know the APN to set to this phone?

• type it in exactly as it appears below.
• APN: wholesale
• APN type: default,mm,supl
• Proxy: not set
• Port: not set
• Username: not set
• Password: not set
• Server: not set
• MMSC: http://wholesale.
  mmsmvno.com
  /mms/wapenc
• MMS Proxy: not set
• MMC: 310
• MNC: 260
• Authentication type: not set
• APN Protocol: IPv4
• APN roaming protocol: IPv4
• APN enable/disable: APN enabled
• Bearer: unspecified
• MVNO type: none
• MVNO value: not set

Press the Menu key and save. Reboot your phone and test your data connection by opening a web page.

Hi Edward,

Here are the steps..

Internet Setup

Step 1: Enter Settings
Step 2: Select Wireless & Networks
Step 3: Select More...
Step 4: Select Mobile Networks
Step 5: Ensure Data Enabled is checked (enabled).
Step 6: Select Access Point Names
Step 7: Create a new APN (Select Menu, followed by New APN). Enter WIND Data as the name for the new APN. Under the headings APN enter internet.windmobile.ca (leave all other fields blank).
Step 8: Save the APN settings by selecting menu and then save.

Picture Messaging (MMS)

Step 1: Enter Settings
Step 2: Select Wireless & Networks
Step 3: Select More...
Step 4: Select Mobile Networks
Step 5: Ensure Data Enabled is checked (enabled).
Step 6: Select Access Point Names
Step 7: Create a new APN (Select Menu, followed by New APN). Enter WIND MMS as the name for the new APN. Under the following information in the listed headings:

• APN: mms.windmobile.ca
• MMSC:http://mms.windmobile.ca
• MMS Proxy: 74.115.197.70
• MMS Port: 8080
• MCC: 302
• MNC: 490
• APN Type: mms
• Leave all other fields blank.

Android 2.1 to 2.3

Internet setup

Step 1: Enter Settings
Step 2: Select Wireless & Networks
Step 3: Select Mobile Networks
Step 4: Ensure Data Enabled is checked (enabled).
Step 5: Select Access Point Names
Step 6: Create a new APN (Access Point). Enter any name you would like to call your internet connection and the access point as internet.windmobile.ca (leave all other fields blank).

Picture Messaging (MMS) setup

Step 1: Enter Settings
Step 2: Select Wireless & Networks
Step 3: Select Mobile Networks
Step 4: Ensure Data Enabled is checked (enabled).
Step 5: Select Access Point Names
Step 6: Create a new APN (Select Menu, followed by New APN). Enter WIND MMS as the name for the new APN. Under the following information in the listed headings:

• APN: mms.windmobile.ca
• MMSC: http://mms.windmobile.ca
• MMS Proxy: 74.115.197.70
• MMS Port: 8080
• MCC: 302
• MNC: 490
• APN Type: mms

Probably the data is off, try going to Settings, More, Mobile Network, and check the Data Enable box. If you still can't get internet by enabling data, then your APN must be off. If you are still with T-Mobile, then go to Settings, More, Mobile Network, Access Point Names or APN. From here you can see which Access Point is check, troubleshoot by checking one of T-Mobile's APN and trying to use the internet without Wi-Fi.

I posted this answer many days ago on the other thread of yours, but I got no feedback from you so far. I'll reproduce it here, anyway: Starting from any of the home screens- Press Menu- Tap "Settings"- Tap the "System" tab- Make sure that "Airplane mode" is unchecked- Tap "Mobile Network Settings"- Make sure that "Data enabled" and 'Always receive MMs" are checked- Tap "Access Point Names"If there other APNs are already stored- Select APN- Press Menu- Tap "Delete APN"- Repeat the above steps for all remaining APNsNow define the Simple Mobile APN- Press Menu- Select "New APN"- Enter the following information:-- Name: SIMPLE Mobile-- APN*: simple -- Proxy: <Not set>-- Port: <Not set>-- Username: <Not set>-- Password: <Not set>-- Server: <Not set>-- MMSC: http://smpl.mms.msg.eng.t-mobile.com/mms/wapenc-- MMS Proxy: <Not set>-- MMS Port: <Not set>-- MCC: 310-- MNC: 260-- Authentication Type: <Not set>-- APN type: <Not set>
*the APN field is case sensitive
- Press Menu- Tap "Save"
Hope it works for you.
Anyway, please, let me know if you need further informations.
Regards,Carlos

My Suggestion is that , Do 3 Steps, then your GPRS will be enable...

1. Open: Settings -> Wireless -> Mobile Network -> Internet access points.
2. Create a profile for the Internet:
Name: TELE2 Internet
APN: internet.tele2.ru
MCC: 250
MNC: 20
APN type: default
The rest of the field: leave it blank.
3. Press Menu -> Save setup is complete.

Check your APN is enabled.If you are using any apps like apndroid etc make sure you enable it. If not due to the third party apps, make sure the APN's are indeed configured properly. If not sure you may request your service provider to send the apn settings again to your phone.

You need either GPRS enabled with your SIM card or WI-Fi enabled.
For GPRS enabling, go to Settings ->Network->EDGE->APN -type your SIM Card GPRS site address, ask your SIM provider for the details. Username-put your phone number with country code and Password-put what is there for your SIM.

For Wi-Fi enabling, go to Settings -> Wi-Fi-set it to ON and it would automatically search for nearby connections. If you find one unlocked, just select that and start using internet via SAFARI!!!