How can i play movies on a Seiki TV using USB?

Some TV models have a USB port so that users could play videos and movies from USB on TV. You can try the following steps:

1. Connect your readable and writable USB drive to computer
2. Copy your movies to USB drive and then disconnect your USB drive from computer.
3. Connect the USB device to the Sony TV USB port. Turn on the connected USB device if necessary.
4. Press the HOME button on Sony remote controller to open the menu.
5. Enter the target USD drive.
6. Select the file you want to play back, and then press the play button to start playing movies on TV via USB drive.
It's quite easy to play movies from USB on smart TV devices.

Cannot be done. The USB port on the TV is for "Service use only", according to the TV's specs on the manufacturer's Web site. SEIKI SE321FB

maybe you did not properly select the right application in your tv... example if you play movies go to movies menu and if thats music go to music menu and also for pictures go to picture menu......or the format of you data is not supported of you TV..

I hope you must have chosen the right in put source.

Yes, I know Panasonic DVD S48, if your movie file is right divx avi movie file, you can directly transfer the divx avi movie file to your usb disk and play on your Panasonic DVD S48, but if your movie files isn\'t divx avi movie file, you have to use a right software to convert your movies to right divx avi movies, then transfer to your usb disk, convert any movies to divx avi movies.

i have a 32inch hisense led tv i watch movie using usb but it stop and back to the begining when the movie is over 2hours.. hope you can help me .

The TV can only play a specific format of video. You may be using MP4 files while the TV can only view 3GP or FLV formats; just try downloading a converter (I've used FLV Converter on Windows XP for years, works fine and very simple) and changing the file format.

The file format maybe wrong check the device your using to play movies with and see what type of files it plays etc.

OK, well I have used this many many times. You simply need to copy the Movie in any of the Formats that the set can use, and copy the Movie to the USB stick. When the stick is inserted, using the remote you simply "Select" that "USB Input" and select the Movie, and select "Play", IF the right Format, has been used, the Movie will "Play" as if it was a DVD.
Consult your manual. link below.
http://www.tacp.toshiba.com/dvd/product.asp?model=47HL167