SOURCE: i lost my lexmark x2600 installation disk
You can go to this link and download the software for your printer, just select the operating system that you're using on your computer http://downloads.lexmark.com/perl/downloads/downloads.cgi?ccs=229:1:0:92:0:0
Hope that helps..........
SOURCE: printer card transfer monitor problem..can you help me with this?
I had the same problem with my lexmark x4850 printer it just kept poping up I uninstalled the software and reinstalled it, it was doing the same thing. I just repaired my Microsoft Netframe 2.0 and it has gone away.
helpful hand
SOURCE: Paper jam in my new Lexmark x2600 inkjet printer
I had the same problem with it jamming every time that I printed. I took it a part and found that a pencil had fallen into the bottom of the paper feed. I removed it and it works fine now.
SOURCE: i lost my disk that came with my x2600 all in one printer
The Internet is such a wonderful tool if used correctly. What you want to do is go to your start page of your Internet page. Mine is Firefox, very secure less pop up's. Type in the following, free download for lexmark productivity studio. Or just go to this link http://www.soft82.com/search/lexmark-imaging-studio/. Remember when you go to this web site be sure to bookmark it so you can got back to it. Hope this helps.
JimmyC
SOURCE: I am missing the power cord from Lexmark x2600
Go to http://parts.lexmark.com and this will led you to a page where you can look up the power cord and order it for only $2 :) hope it helps.
A
quick fix for most communication errors can be achieved by resetting the
printer and/or rebooting the PC. Simply disconnect the printer from your
computer. Reboot your pc. Unplug and re-plug the printer into the power source
to reset it. When the printer turns on, reconnect it to your computer. Then try
to print again once the computer fully recognizes the USB connection.
If
that doesn't help, try the steps below:
1.
Disconnect the printer from your computer.
2.
Rebrick (pull out power supply, black box where the
power cord is plugged in at the back of the printer, and put it back after 30
seconds).
2.
On your computer, go to Control Panel > Printers and Faxes.
3.
Delete the Lexmark print object.
4.
Reboot your pc.
5.
When your pc turns on, reconnect the printer.
6. Wait until your pc fully recognizes the USB connection. To check, go to Control Panel > Printers and Faxes. If you see a new Lexmark print object in the list, then try to print a document again to verify that the problem is fixed.
186 views
Usually answered in minutes!
×