Introduction
Perform a semi-full reset to set all user menu settings, telephony parameter settings, country/region and language UI, fax memory settings, fax journal information, speed dial and broadcast lists, personal header information, and junk fax settings to the default settings.
Performing a semi-full reset of the All-in-One
-
Use the On button to turn on the product.
-
Remove the power cord from the product.
-
Press and hold the # and 6 buttons.
-
While holding the buttons down, connect the power cord to the product.
-
Continue to hold the buttons down until the color graphics display becomes blank, then release the buttons.
-
Use the On button to turn on the product. The reset information appears on the color graphics display.
Perform a Soft reset:
Introduction
Perform a semi-full reset to set all user menu settings, telephony parameter settings, country/region and language UI, fax memory settings, fax journal information, speed dial and broadcast lists, personal header information, and junk fax settings to the default settings.
Performing a semi-full reset of the All-in-One
-
Use the On button to turn on the product.
-
Remove the power cord from the product.
-
Press and hold the # and 6 buttons.
-
While holding the buttons down, connect the power cord to the product.
-
Continue to hold the buttons down until the color graphics display becomes blank, then release the buttons.
-
Use the On button to turn on the product. The reset information appears on the color graphics display.
Introduction
Perform a semi-full reset to set all user menu settings, telephony parameter settings, country/region and language UI, fax memory settings, fax journal information, speed dial and broadcast lists, personal header information, and junk fax settings to the default settings.
Performing a semi-full reset of the All-in-One
-
Use the On button to turn on the product.
-
Remove the power cord from the product.
-
Press and hold the # and 6 buttons.
-
While holding the buttons down, connect the power cord to the product.
-
Continue to hold the buttons down until the color graphics display becomes blank, then release the buttons.
-
Use the On button to turn on the product. The reset information appears on the color graphics display.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01457329&cc=us&lc=en&dlc=en&product=1153494
Or a Full reset:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00720248&cc=us&lc=en&dlc=en&product=1153494
Click on this link or copy and paste the complete link into your browser.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe
I’m happy to assist further over the phone at
https://www.6ya.com/expert/joe_8b8c2cd6ce148309
Hi. I am writing books, and I can say that every journal need an introduction for sure. You should let the readers understand what your are talking about before starting the content itself. I am always writing introductions in my journals, which are covered with a very nice leather cover from https://olpr.com
×