3 room, colors dark red/cream with a blue sunscreen over top. Approx size 17' x 6 1/2'
Hello -
I have found some instructions online with directions on assembling a Wenzel tent. However, none of them are clear is they are for the Swiss Gear tent style 36288.
See these instructions:
http://campingexpertguides.blogspot.com/2016/06/classic-wenzel-camping-tents-assembly.html
If you have not already done so, I suggest you contact the Wenzel Tent & Gear Co. directly and ask a Customer Service representative about the availability of assembly instructions for your Wenzel tent style. The company may hold instructions in the corporate archives which can be copied (for a fee) for you.
This is the link to the Wenzel Tent & Gear Co. Contact Us page:
https://wenzelco.com/contact-us/
If you choose to make a telephone call, I suggest you do so during weekday business hours (Mountain Time).
Best wishes.
SOURCE: I have a Hopkins Brake Control the pigtail colors
1. connect the red wire to the stop lamp switch lead on the brake control. Connect the other end of red wire to the stop lamp switch in the vehicle using the splice connector
2. connect the blue wire to the trailer brake lead on the brake control. Route the other end of the blue wire to the trailer connector at the back of the vehicle.
3. connect the white wire to the ground lead on the brake control. Route the other end of the white
wire to the vehicle’s battery. Use the ring connector to connect the white wire to the battery’s negative terminal.
4. connect the black wire to the power lead on the brake control. Route the other end of the black wire to the vehicle’s battery. Use the fuse assembly to connect the black wire to the battery’s positive terminal.
Check the dealer to see if they have a pig tail to wire in. if so the new pigtail should have same wire color for matching up.
840 views
Usually answered in minutes!
×