Question about Building Materials

1 Answer

I have A MODEL 632 MMD MASTER MECHANIC garage door opener ser # 302713200414. I have a neighbor who`s remote opens my garage door. How do I program my unit to have a different frequency ?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 791 Answers

First, I'm not a Master Mechanic representative.
* Check your warranty. call for support.

*** Following for information only.***
* Most openers that come with a remote (some don't) will have a matching "Dip Switch" in the control unit and the remote. If yours is like the old style Craftsman then the remote is about the size of a cigarette box. It snaps open and your will see a bar with lots of little switches. This will be the same as the one in the motor drive unit in the garage.
* All you have to do is flip one or two switches and do the same with the garage motor unit.
* Double check that you flip the same for both remote and motor drive. There will be numbers to identify each switch. Compare to the remote.
**************** For new "Fob" remotes.************
* This is more difficult as these codes have to be "Programed" into both FOB and motor unit.
* Your manual (page 35) shows how to program; https://www.liftmaster.com/catalogresourcesv3/en-us/shared/files/tucmanuals/114a3064.pdf

* Aloha, ukeboy57

Posted on Sep 07, 2018

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
glenmann62

Glenn Mayer

  • 91 Answers

SOURCE: programing garage door opener remote

ok crystal,calm down this is an easy one! first locate the smart button on your openers , next you will press and hold down the smart button until you see an indicator light above it shut off, while your holding that button the light will be solid ,Now your ready to program your remotes ,first programm one side by taking each of your four remotes and pressing the smart button on machine then pressing the button on the remote you want to program,by doing that you will notice the lightbulbs on your machine shut off and go back on , This is an indicator that your machine has accepted the code , now do it with the other three remotes , after you,ve programmed all four ,go over to the other machine and repeat the process but this time you have to choose another button on your remotes since you,ve programmed all four remotes to the same button on each remote ,just choose the bottom button on your remotes this time to keep them seperated , hope this helps you and it is as easy as 1-2-3 your owners manual will describe exactly the same ,i know because i,ve installed over 27,000 machines working as an installer for sears, please leave a nice feedback rating if i was able to help you, good luck,Sincerely Glenn Mayer

Posted on Apr 01, 2009

Don Maggard

  • 3197 Answers

SOURCE: Universal garage door remote

I have a feeling your neighbor operated their door opener when you were programming your new clicker. Try erasing the memory of your opener and then program the clicker again making sure your neighbors do not operate theirs at the same time. To erase the memory hold the smart/learn button in for 10 seconds.

Posted on Jul 22, 2009

Don Maggard

  • 3197 Answers

SOURCE: Access Master Garage Door Opener opens by itself

The most common cause of this is a bad wall control or the wiring going to it. The wall control goes bad from use and the wiring sometimes has intermittent short caused by the staples the installer used.

Posted on Jul 31, 2009

Don Maggard

  • 3197 Answers

SOURCE: Garage door is opening when the neighbor open theirs with remot

You say you "setup the remote and the main box but doesn't solve." I think you mean you programmed the unit but I'm not sure. Anyway try holding the smart/learn button in for 10 seconds and this will erase the memory. None of the remotes should work. Now when you are sure the neighbor will not be using their opener, program your remotes. This may be what you did but I'm not sure.

Posted on Aug 27, 2009

Don Maggard

  • 3197 Answers

SOURCE: Where to buy remote control and reset My garage door opener also

To erase the memory of the opener so that your old remote will no longer work you need to locate the smart/learn button on the rear of the motor unit. Press and hold this button for 6 seconds. No remotes will now work.

To program the new remote when you get it, hold the button down on the remote and then press and immediately release the smart/learn button.

Call any local door opener repair company from the yellow pages and you should be able to buy a remote from them.

Posted on Feb 08, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to program Clicker Keypad with Master Mechanic 501MM


Master mechanic 601mm on the buildmark - YouTube

? 2:14
www.youtube.com/watch?v=ga8yaYi0brY
Feb 18, 2012 - Uploaded by RGDMan
Master mechanic 601mm on the buildmark .... Reset Garage Door Keypad Code PIN & Remote Control Opener - Duration: 2:51. by ... Chamberlain CLICKER Universal Remote ControlProgramming Video - Duration: 5:21. by ...

Sep 28, 2015 | Building Materials

1 Answer

I have a Master Mechanic Garage Door opener that I am trying to use a Genie Master Remote to operate. What steps do I need to take to operate the door with the Genie Remote?


You have to pair the remote with the opener, which will require the opener manual because you have to put the opener in programming mode.

Dec 06, 2014 | Building Materials

2 Answers

How do I program the garage door opener?


You post again, what the model is of the opener, the car model, it looks like this control is in a car.

Most times you need the garage door remote, then you have to hold a button and the remote button to sync the two.

What ever you are trying to program, if this is a car, you need the manual.


If you need more help, you need to post the model number of everything.


Not every car, every opener is the same at programing.

Imagine that, life simple.

Apr 03, 2013 | Building Materials

1 Answer

I live in a 4-unit condo building constructed in 2008. Recently, after I trained/programed a garage door opener incorporated in a new car I purchased, I discovered that my garage door started to be...


I would recommend this. I'm not sure this will work, but I think it will.
Try starting from scratch. Reprogram the unit to the car again, I think the codes change each time it is done. If not, it's not too difficult to try.

Jan 01, 2011 | liftmaster Chamberlain Garage Door Opener...

1 Answer

Our remotes (2 for the car and a keyless entry) stopped working. We erased everything (and checked to make sure our remotes weren't working) and reprogrammed all remotes. They work, but our neighbor's...


Make sure your neighbor doesn't have a remote with a sticking switch. Often times a person will stick an extra remote in a drawer and then place something on it that holds the button down. Try programming your remotes this way just in case you didn't.

Press and hold the button down on the remote while you press and immediately release the smart/learn button. Sometimes it can help if you are in the garage when you program your remotes this way and it will drown out any distant signal.

Nov 20, 2010 | Sears Craftsman LiftMaster Chamberlain...

1 Answer

I really need your help. My Craftsman unit model number is 139.53615SR manufactured 1/92. I have a three car garage. The original two remote controls were lost and since then I've used the setting in my...


Have your neighbor bring over his remote and open or close your door with it. Then hold the smart/learn button in for 6 seconds on your opener. Then see if he can open your door. He shouldn't be able to because that procedure erases the memory in your opener. No remotes should work. You need to get that remote #53778 back and program it and then see if your neighbor can open your door. If he can open your door at any point after you have held that button in for 6 seconds you need to get a new door opener.

Oct 25, 2010 | Sears Craftsman LiftMaster Chamberlain...

1 Answer

Garage door is opening when the neighbor open theirs with remot


You say you "setup the remote and the main box but doesn't solve." I think you mean you programmed the unit but I'm not sure. Anyway try holding the smart/learn button in for 10 seconds and this will erase the memory. None of the remotes should work. Now when you are sure the neighbor will not be using their opener, program your remotes. This may be what you did but I'm not sure.

Aug 27, 2009 | Sears Craftsman LiftMaster Chamberlain...

1 Answer

Universal garage door remote


I have a feeling your neighbor operated their door opener when you were programming your new clicker. Try erasing the memory of your opener and then program the clicker again making sure your neighbors do not operate theirs at the same time. To erase the memory hold the smart/learn button in for 10 seconds.

Jul 21, 2009 | Sears Craftsman LiftMaster Chamberlain...

Not finding what you are looking for?
Building Materials Logo

Related Topics:

151 people viewed this question

Ask a Question

Usually answered in minutes!

Top Building Materials Experts

Tom Chichester

Level 3 Expert

54853 Answers

Lawrence Oravetz

Level 3 Expert

10543 Answers

ray gallant
ray gallant

Level 3 Expert

65393 Answers

Are you a Building Material Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...