What does code PF mean - Dryers

PF is power failure error meaning electricity has been interrupted to the machine. An electrical interruption of any type can cause a PF error code. Try this: Press the Pause/Cancel/Stop button twice to clear the PF in the display.

Courtesy: https://www.ifixit.com/Answers/View/285793/What+does+the+PF+error+mean

Hello!

Code PF means that a power failure occurred on the control board during the program run.

In most cases, the reason for the code PF on the display is not in the washing machine, but in the problems of electricity supply of your house or apartment.Turning off the electricity or a power surge most often results in this error.

PF means power failure and ND means that it did not drain and still has water in it.

Depending on manufacturer and model, PF can mean a number of things. On my stove, PF simply indicates "Power Fail" Yours may, too. You can clear this generally by updating the clock display. To verify that PF does indeed mean power fail for your stove, simply shut off the power for the cicuit than supplies the stove. This can be either circuit breaker or fuses. Turn the power back on after 5 or more seconds and if it displays PF again, you know it means power fail.

Otherwise, please provide the manufacturer and model of you stove for an answer.

Good luck!

Code PF means at some point the stove lost electrical power, PF=Power failure detected, this can be the wall plug lost power or it can be the control board inside the range failing.

Hi,

Here is a tips that I wrote that will help to explain why you get the PF Error Code

PF Error Code for Appliances

heatman101

l;l[]\][\

Hi,

Here is a tips that I wrote that will help to explain why you get the PF Error Code

PF Error Code for Appliances

heatman101

';';././

Well the code pf means power failure, check your cord and see if it connected ok. make sure you didn't blow a breaker in your powerbox.

pf usually means power failure. Try to clear the screen or hit the off button to clear pf and then see if it works.

PF means Power Failure!
Unplug both units for 10 minutes, then plug them back in and try operating them. You may need an electrician to investigate why you are losing power to both units