Direct tv says disc is full. - Directv Plus DVR DTV Receiver / 100-Hours Video Recorder

see the charts troubleshooting and fix it. God bless you

No sound

1. Check if the TV and Amplifier (if connected) is turned on and set correctly.
2. Check if the TV, DVD player and Amplifier are connected properly.
3. Make sure the TV, DVD player and Amplifier volume are not set to Mute.
4. There will be no sound output during Reverse Play / Pause / Step / Slow / Search.
5. If the DTS soundtrack is enabled in the DVD Disc Menu, but you are using Stereo Analog audio, the sound will not work. Try switching the soundtrack to Dolby 5.1 or PCM mode in the Disc Menu.

1. Disc is dirty or damaged. Clean the disc or try another disc.
2. Reset the color system of the player or the TV set.

Try a direct connection from the DVD player to the TV set, instead of via other components.

Picture noise / distortion

1. Disc is dirty or damaged. Clean the disc or try another disc.
   

2. Reset the color system of the player or the TV set.
   

3. Try a direct connection from the DVD player to the TV set, instead of via other components.
   

   Test the wires connector terminal from dirty and corrosion, clean it with contacts cleaner very well and try again.Use the Disk cleaner for clean the Pickup system
   

   God bless you
   

see the cause and fix it:
1er alternative:

1. Disc is dirty or damaged. Clean the disc or try another disc.
2. Reset the color system of the player or the TV set.
3. Try a direct connection from the DVD player to the TV set, instead of via other components.
4. 2nd alternative:
5. Enter Setup and then Player menu to select the correct screen format.
6. Select the screen format from the DVD disc menu or press zoom key.

Not enough information...
What type of tv and model etc.

One thing you should be aware of.
If you do not have HD tv...say direct tv
then you maybe stuck with a smaller picture.

Example:
If I run my direct tv HD I get a full picture but, if
I am running it in a non HD channel...the picture
is alot smaller with the black sides and top.

The other option is on your remote you should
have buttons to control stretch etc.

Use those and see if they help.

As far as dvd"s go...make sure your not using
the letterbox versions...full screen versions should
give you ...well...Full Screen.

good luck

Humax codes are,1325,1565,1569 Ted10

Your format is wrong. Make sure that your tv is in full mode and your direct tv is in 1080i stretch mode. This should correct the problem. Also, WB is having problems. This is common on their channel. If it is happening on any other channel, try the above. Hope this helps. JOHN

Cant give you a full list, but the Pixma series from Canon does.

You should be fine. Direct TV advertises that they are already broadcasting in full digital. So your box or DVR will act as that converter.

It sounds to me like its a direct tv issue and you should contact them.

IN THE GOOGLE SEARCH ENGINE TYPE VIVITEK V37835 MANUAL. ONCE YOU GET THE MANUAL LOOK IN THE SECTION OF THE MANUAL THAT SAYS SETUP CODES FOR SATTELITE RECEIVERS. FOLLOW THE INSTRUCTIONS FOR PROGRAMMING UR REMOTE. ALSO WANT TO LET YOU KNOW THAT I HAVE DISH SATTELITE AND I USE MY VIVITEK REMOTE NOT THE SATTELITE REMOTE FOR MY PROGRAMMING. MAYBE TRY THIS. IT WORKS FOR ME.