On screen menu setting in display setting/ or main settings. change to 30 seconds
SOURCE: My roomba pro elite just goes around in a circle.
the infrared sensor circuit has failed, u will need to have it repaired
SOURCE: my roomba goes in the same circle over and over
Sometimes this can occur when one of the wheel motor sensors has dirt in it. I have had some success blowing compressed air into my main wheel units. You can disassemble them for cleaning, but it is quite involved.
SOURCE: roomba vacuum only goes around in circles then
clean your filter . mine was doing the same thing and i took everythng apart under it and low and behold it works wonderful now. but now ive lost the lil brass screw that holds the lil brush on ugh
SOURCE: Roomba going in circles
Roomba going in circles. Called irobot and if reseting it (by taking out the battery, unplugging it from the charger, and holding down the power button for 30 seconds), didn't work, turn the roomba over, take a compressor and blow air into the front. Maybe a shop vac would also work. We cleaned out the whole thing while we were at it. And now it works just fine. The tech person at irobot was very helpful.
SOURCE: The Roomba goes around in circles. If it
Sounds like the 9-beep error. Google "roomba repair kit" to get it fixed.
This Will FixYa!82 views
Usually answered in minutes!
×