PLEASE SEND ME MANUAL FOR SMC IP 8101 - 033 - CH (ROTARY TYPE) THAT HAVE PARAMETER SETTING

http://www.smcpneumatics.com/IP8101-030.html USE LIVE CHAT

go to dos prompt in a windows pc and type in ipconfig and press the enter key to find the default gateway address
it might be 10.0.0.1 or 192.168.0.1 these are the most common. Type the ip address into internet browser to log into the gateway router. There will be an admin user name and admin password. It might be the default or it might be written hopefully on the router case/
try
Username: cusadmin Password: password IP Address: 192.168.0.1 http://www.cleancss.com/router-default/SMC/SMC8014WG
if you get into it look up wi fi security to find out the wep key or wpa key

1. Open your web browser, type in the router's IP address (standard: 'http://192.168.2.1') and press enter.
2. Click on Login, Advanced Setup, Firewall, enable it and click on apply.
3. Click on DMZ and select Yes to enable DMZ.
4. Enter the IP address of the PS3, which was assigned a static ip address to be kept under DMZ, and click on apply.

Hope this helps

Go to the SMC site and download the appropriate manual.

For Windows XP, it says:
"To access the Router’s management
interface, enter the Router IP address
in your web browser http://
192.168.2.1. Then click LOGIN.
(By default, the password is
smcadmin. The default is case
sensitive.)"

Once you are logged in, you may change your password under the System -> Password Settings section.

Please Approve of this answer if I answered your question.

you should be able to configure the setting in the utility for the adaptor to auto renew the ip address

I assume this is your wireless KEY
The user manual is here http://www.smc.com/index.cfm?event=downloads.doSearchCriteria&localeCode=EN_GBR&knowsPartNumber=false&productCategory=1&modelNumber=955&partNumber=3552&downloadType=8&os=0
you can choose the exact model from here http://www.smc.com/index.cfm?event=downloads.searchCriteria&localeCode=EN_GBR&knowsPartNumber=false&productCategory=1&downloadType=0&os=0
You should be able to see how to view or reset the wireless password.
Connect your PC to the Router with a LAN cable:- You will need to login to your router- you do this by typing a number into a web browser, Internet explorer, is best as some routers do not work with other browsers The way to log into the router is usually to use the IP address, thats a number which will be in the manual - Page 29 on the manual (33 on pdf screen) To access the Wireless Barricade’s management interface, enter the Wireless Barricade IP address in your Web browser http://192.168.2.1. Then click LOGIN. (By default, there is no password.) Goto the wireless section - secruity and you should be able to see the KEY - IF its all * - the you can type in a newone
I would also remove the wireless profile from your PC - to do this have a read of this link. Remove the wireless profiles from your PC http://mgmcc.forumotion.net/networking-tutorials-f17/removing-an-existing-wireless-profile-t109.htm

• If this solutions solves you problem, please do not forget to rate my solution.
• If not, then please comment back so I can help some more

Are you able to get online directlty from modem? If yes check what is IP address you get from modem, if it is like 192.168.1.xxx, then you need to set connection type as DHCP(not PPPoE), and change router's local IP address to 192.168.2.1 , and reboot router and modem.You can try this steps:
1. Access the router setting via a browser.
2. On Setup, Basic Setup:
- Internet Connection Type unchanged as "Automatic Configuration - DHCP"
- Local IP Address changed from 192.168.1.1 to 192.168.2.1
- Settings saved
3. Clicked on Status to check if IP Address value has numbers (not 0.0.0.0). If you have zeroes, click DHCP Release then DHCP Renew.
4. Wired connection to internet OK. Wireless connection from a family PC also OK.
Good to go i thinks.Let us know.

just hardwired a computer to the router and open a web browser. on the address bar of the web browser type http://192.168.2.1 (default ip address of the router) and you will be prompted with the login screen. by default you don't need to type anything on the password field. now you will prompted with the router's page and from there you can set it up.
click here for the manual.

hope this'll help you

ciao

Download the latest driver from SMC corporation and update the phone as instructed.

Before, I couln't hear it ring from 5 feet away. Now I can hear it ring from the next room.



http://www.smc.com/index.cfm?event=downloads.doSearchCriteria&localeCode=EN_USA&knowsPartNumber=false&productCategory=14&modelNumber=1564&partNumber=3564&downloadType=0&os=0

1. Open your web browser, type in the router's IP address (standard: 'http://192.168.2.1') and press enter. 2. Click on Login, Advanced Setup, Firewall, enable it and click on apply. 3. Click on DMZ and select Yes to enable DMZ. 4. Enter the IP address of the machine, which was assigned a static ip address to be kept under DMZ, and click on apply.