How much will it cost to replace the lcd screen on my samsung LN32a330 and where can i purchase the lcd screen itself.

Samsung TV won't turn on + blinking red light (explained fix ...

? 4:03
https://www.youtube.com/watch?v=wEWzYLaKdgU
Aug 29, 2014 - Uploaded by Mysimplefix
(CC) (HD) A step-by-step repair video, showing the replacement of swollen/shorted "electrolytic capacitors ...Missing: un55fh6003fxza
bout 1,270 results (0.53 seconds) Search ResultsSamsung LCD TV LN32A330 power won't turn on - Forums - CNETwww.cnet.com > Forums > SamsungCNETMy 1 1/2 year-old LCD TV model LN32A330 won't turn on by direct and remote today. The red stand-by light is lit, but never blinks and the TV won't power up. A..Samsung UN55FH6003FXZA BN94-06418R Main Board ...www.shopjimmy.com/samsung-un55fh6003fxza-bn94-0641...ShopJimmyThis Samsung UN55FH6003FXZA BN94-06418R Main Board IC901 EEPROM ONLY ... TV won't turn on after being off for 30+ minutes - TV shuts off by itself

Not much if it was on the screen it is forever. The outside of most screens has a anti-glare coating that cleaners with chemicals destroy, usually a warning in the owner manual about this and most sets that screen is part of the display unit itself--cannot be replaced.

You cannot fix cracks in LCD screens. You can only replace the panel assembly. Most times it will be cheaper to buy a new set vs. having the screen replaced.

replace bad caps on power supply board. Or just replace board.

HI...
Replace the main power supply

How to fix it.....
it totally worked for me....

http://www.youtube.com/watch?v=Mm51C_RDIZE

I have a LN32A330 with a cracked screen. I can sell you boards tha you may need or maybe i can purchase your non working set.
Please email me, [email protected]. You may need your power supply repaired. I am able to repair it for you if needed.

This can be one of two problems. The backlight inverter board is bad # BN44-00235B <or A $60-80
Or one of your backlights is bad/broken. Not a easy repair. Single lamp is about $16-25 whole kit $150. But finding a great tech who can or will take the screen/light box apart to do it will be the biggest task. Takes about 3 hrs to do. And if you do NOT know what you are doing,you will damage the screen.
Then you just throw it away. But if your lucky, it might just be a bad connection. If it comes one after it goes off. But if it just flashes on for a couple seconds then does not come back on, Most likely bad backlight/or inverter. It goes in to protection mode.I have seen in a couple of Sony's it being the T-con board "LCD control"board do the same. $60-125
I wish I could give you better news. It is not easy to tell the problem on that without testing out each lamp "15-20 of them w/a lamp tester" or checking out each transformer on the inverter board. Verry time consuming. This is why I push the Extended Warenty. LCD's still have bugs to weed out. Plasma's are even worse.

You need to check the power supply module for bad caps, fuse, etc. It should put out 5, 12, and 24vdc when it is working.
Parts: http://www.shopjimmy.com/catalogsearch/result/?q=Samsung+LN32A330+

Hai,
Please check on here....you will find it out!