GE Gas range won't work because "Door Locked" light won't go out

You will need to replace the probe. Here is the part to order.

You will need to replace the lock assembly. Here is the part to order.

Unplug the unit and wait 2 FULL MINUTES before plugging it back in. That will reset the circuit board and you should be good to go. If it doesn't work, my bad!!!!!!
-AGK

Both the oven" ON " light and " Clean " light will flash when the clean has finished . When the " clean " light flashes , slide the latch handle to the left as far as it will go , then turn the " OVEN SET " knob to " OFF " to open the door.

there should be some type of button that the door hits to turn it on and off

I had the same problem happen tonight. I have an XL44 self-cleaning gas range. We unplugged it for several minutes and pressed 'cancel' a bunch of times--neither worked. We finally lucked out--opened the oven door and pressed a black button on the upper left side of the front of the oven. It turned out the flashing words and unlocked our door. Weird. There was nothing in the manual about this...

locked door is flashing and oven will not go on, help need to disconnect dorr latch if anyone knows how

door lock is not work check wires motor and switchs.. you may have to replace the door lock

Look for a microswitch connected to the lock mechanism at the back of the stove. The switch is probably broken.