How to clean the datamax oneil microflash 4te Printer?

Most likely this has a ribbon, check the settings for how low before warning. http://www.datamax-oneil.com/assets/maint_manual/I-Class_M2_Maint.pdf
go to page 39

You might need to clean "oven" or to change printink calc (carbon paper), how long do you print on the same calc ?

Sounds like a faulty bluetooth card or main board.

You will have to go to settings and alignment option. You may also have to pick out a different paper size option.

GO TO ADVANCED SETTINGS

rmchale: Check the new p/n in this manual http://www.datamax-oneil.com/do/com/en-us/file.cfm/92-2506-01.pdf?contentID=4469 .

Roberto Martinez
[email protected]

mmoore503: Maybe have to update firmware, and to download you must update the "boot loader" also. Download files in ftp://ftp.datamax-oneil.com/Printer%20Firmware/

Roberto Martinez
[email protected]

If you are changing length(feed length) you may have to recalibrate the printer . Also ensure that your print format is the correct length for the stock.
You can look at the setup of the printer using the datamax-oneil printer configutation program, or if it is using IP connection, you can go directly to the internal web page for set up. make the cal length 3 times the label length, or leave at the default value.

aldorobert20: Download driver in datamax-oneil.com or in seagullscientific.com

Roberto Martinez
[email protected]