Whats the problem with epsonstylus 1410 the two red lights flicker continuously and it cant start

Take your cell phone and turn the camera on, then aim the remote at the cell phones camera while pressing different buttons.

The infra red light will become visible and be flickering at different intervals depending on what button is pressed.

That is the start to see if it is even "TRANSMITTING".

Any infra red device that transmits will do this on a web or cell phone camera regardless of what it is.

They can see what we cannot with out eye!

Start there first if all coding fails and you still have the red indicator light working.

I hope this helped solve step one!

Robert W!

Depends on the speaker/subwoofer. Some red lights indicate the point of 'clipping', which would be the maximum volume without distortion. That would be likely if the light is flickering and not continuous.

Flashing Red Light is not charging and solid red light mean charging the radio battery.

check bad component parts at the power supply board as will as burnt parts.

When both lights on the printer are illuminated it means the printer is at the end of it's usable life, you can reset this counter with software. EpsonIPRutilty
Michael

well you must use the correct ink, you use a very thin ink, that´s way it´s bleeds, the ink is very metal corrosive, and destoy al mec. parts and bunsout the print head. NOTE:you have ruined your printer, the repair is very expensive.

Turn your printer off and turn it back on.

hi right now samsung is the best tv maker out right these problem dont happen with samsung what would be good to do is call them and let them know your problem cause you have a year protection on it thats if it less than a year

i have the same problem. i have to switch it off at the mains 5 times b4 it comes on

please let me know what is rail and carriage bushings ?