Pictures of aiwa d77u reciever - Aiwa Audio Players & Recorders

be careful . USA voltage is 110 volt - see on the power input and lable - does it state 220 Volt or 110 . Usually you will find a selector switch on the power input side .to set the local voltage - otherwise you need a stepdown transformer

0038,0036,0032,0030. Try these codes. If you wish to get more; check the site linked here. It has set-up code list & set-up procedure to many popular brand remote controls. See it in "Mosaic" view. It will make surf easier.
http://electrohelponline.blogspot.com/

you also need an amp or reciever, just hooking up speakers to this turntable will not work

you need another reciever/amp to power that sub, because that denon reciever is designed for a powered sub,. if you have another old reciever/amp laying around, you can connect the sub out from the denon into an auxillary input of any old reciever/amp, (switched to that input) with speaker wires from old reciever/amp to the passive sub

REFER TO ITS MANUAL

Any powered sub will work.

Click User Manual link to download a copy.
Hope this will help.

This manual is available at globalsemi.com. Unfortunately it is not a free download. Hope that helps..

HI,

WHEN WORDS AND PICTURES ARE BLUR,DIFFICULT TO SEE,,

ITS PROBLEM WITH LOT (LIGHT OMITTING TRANSISTOR) WHICH INSIDE TV ...

NOT OTHER PROBLEM ..JUST GO TO ECONOMIC TV TECHNICIAN.

TNKS

RABBANEES

www.remotecodelist.com .................................T.